QOS configuration

Post Reply
david12111
Member
Posts: 2
Joined: 28 Nov 2017 04:21

QOS configuration

Post by david12111 »

I have a scenario of a network with about 1000 voip phones.
I need to configure QOS for the voip.

The equipment I have are various 9702E, 6450, 6250 and 6248.

I have part of the voice routed to different sites.

You could explain to me which is the best option to apply QOS. DSCP ?, trusted phones options ? others ?

I just need a little the concept to start.

Thanks
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1885
Joined: 01 Jul 2008 10:51
Location: Germany

Re: QOS configuration

Post by silvio »

Hi,
best way is to have all voip devices in own vlan(s) and a policy at all switches to priorise traffic with this source vlan(s) with DSCP 46.
With this solution I prefere the option "qos no phones" to untrust all others prio and use only my own one.
But also there are a lot of other solutions (f.e. with trust) - but I try always to use the vlan depending prio.
regards
Silvio
david12111
Member
Posts: 2
Joined: 28 Nov 2017 04:21

Re: QOS configuration

Post by david12111 »

Hi Silvio,
We have separated the voip in different vlan(s).

I think the best option would be to configure policies in each switch and prioritize the traffic of these vlans.

Thanks for your help.
Post Reply

Return to “OmniSwitch 9000 / 9000E”