Console Port Connection Problem
Console Port Connection Problem
I have recently brought a Alcatel OS6350-P10 switch. I want to configure this switch through console port. I have a DB9 connector which I have got with the switch and a RJ-45 cable. How to I connect my PC to console port? Also tell me which type of RJ-45 cable I should use to access console port(Straight through, Crossover or Rollover). Please help.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Console Port Connection Problem
Mister, next time you post more than 1 post around for exactly same issue you will be banned as considered to be spammer. You are warned. Last time.
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Console Port Connection Problem
Sorry to post 1 post more than one time... This forum is so dead that no one can a reply to my simple question.. that's why I posted more than one time.. Ban me if you want..
Re: Console Port Connection Problem
Asking for 6350 in wrong board.
Also: Yes there is not much traffic here. feel free to volunteer and help others.
Also: Yes there is not much traffic here. feel free to volunteer and help others.