Hi All,
I just got a 6648 and in my infinite wisdom, I decided to update the bootrom.
However, the upgrade failed. The instructions were very vague as to what to do after this.
Being the genius that I am, I did a "reload". now I've got a dud omniswitch.
Any ideas on if/how I can recover it?
6648 Bootrom failed
-
- Member
- Posts: 3
- Joined: 31 Mar 2012 05:18
Re: 6648 Bootrom failed
Thanks but that's referring to the Flash Card, not the Boot ROM. The 6648 has a 4MB AMD AM29LV040 flash chip.
The problem is it won't boot up at all due to the bad flash on my part.
The problem is it won't boot up at all due to the bad flash on my part.
Re: 6648 Bootrom failed
Try to search here. Sorry, can't help along.
-
- Member
- Posts: 3
- Joined: 31 Mar 2012 05:18
Re: 6648 Bootrom failed
I fixed it myself. I didn't have a "support contract", so I had no other choice but to go at it alone. No perks for being an ex A-L employee unfortunately
Anyway, the flash chip was partially erased due to my smart antics (therefore unable to boot).
I got another working 6648, booted in Miniboot, removed the working flash chip (whilst the switch was running) and replaced with the "bad" one, then did a sysUpdateBootrom several times until the chip was flashed.
It works just fine now.
Anyway, the flash chip was partially erased due to my smart antics (therefore unable to boot).
I got another working 6648, booted in Miniboot, removed the working flash chip (whilst the switch was running) and replaced with the "bad" one, then did a sysUpdateBootrom several times until the chip was flashed.
It works just fine now.