We support GIXEN, the eBay sniper.

7800

Post Reply
Oktay
Member
Posts: 2
Joined: 07 Apr 2015 02:55

7800

Post by Oktay » 07 Apr 2015 03:09

Hi,

I have problem. I forgot my password and ı try to reset the password. Frist J343 and connect pin 1+2 with a jumper.
And ı try this steps

Stop boot seq with Y
type Y to enter VxWorks boot
c to enter config
and ı press enter four time and ı see the password than ı gave up being reset password.
ı write reboot end hit the enter but now consol is not responding. I have 2 cmm card and ı tried these steps on both cards.
Now only 1 card responds but its not openning. How ı can fix this. Please help me


usrInit(): Entered with startType=0x82 (COLD) (w/ POWER ON RESET)
usrInit(): Current BBUS FPGA Revision=44 (0x002C)
usrRoot(): COLD Boot.
Checksumming 'default' miniboot... Done.
Uncompressing miniboot image... Done.
Starting at 0x500000...

startType=0x82 (COLD) (w/ POWER ON RESET)
Current BBUS FPGA Revision=44 (0x002C)

Identified 32 MB of AMD Flash media.
Flash file system already installed.
Intializing the flash file system. Please wait...
Identified 32 MB of AMD Flash media.
Flash file system initialization complete.

The current date and time is:
Coordinated Universal Time (UTC): WED APR 07 06:25:38 2021
Local time: WED APR 07 09:25:38 2021 EEST

/flash/ - disk check in progress ...
/flash/ - Volume is OK

total # of clusters: 14,773
# of free clusters: 1,438
# of bad clusters: 0
total free space: 2,876 Kb
max contiguous free space: 780,288 bytes
# of files: 71
# of folders: 5
total bytes in files: 26,587 Kb
# of lost chains: 0
total bytes in lost chains: 0
Error in boot line:
(0,0) e=192.168.1.1:ffffff00 g=192.168.1.254 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff
^
asciiBootParamsInitialize() failed.
Error initializing boot parameters.
Boot parameters are:

'(0,0) e=192.168.1.1:ffffff00 g=192.168.1.254 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff'


Adding 4062 symbols for standalone.

AOS miniboot version: 5.1.5.340.R01
Attempting to load from the CERTIFIED directory...
Loading kernel from '/flash/certified/Fos.img'...
3420784
Starting at 0x40000...

startType=0x82 (COLD) (w/ POWER ON RESET)
Current BBUS FPGA Revision=44 (0x002C)

Identified 32 MB of AMD Flash media.
Flash file system already installed.
Intializing the flash file system. Please wait...
Identified 32 MB of AMD Flash media.
Flash file system initialization complete.

The current date and time is:
Coordinated Universal Time (UTC): WED APR 07 06:25:41 2021
Local time: WED APR 07 09:25:41 2021 EEST

/flash/ - Volume is OK
Error in boot line:
(0,0) e=192.168.1.1:ffffff00 g=192.168.1.254 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff
^
asciiBootParamsInitialize() failed.
Error initializing boot parameters.
Boot parameters are:

'(0,0) e=192.168.1.1:ffffff00 g=192.168.1.254 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff'

Error in boot line:
(0,0) e=192.168.1.1:ffffff00 g=192.168.1.254 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff
^

Adding 5254 symbols for standalone.
0x75ffd50 (tRootTask): panic: rn_init
0x75ffd50 (tRootTask
): AOS kernel panic: version: rn_i5.1.5.268.R04nit 2

VxWorks (for CMM (Sparc-V9)/400) version 5.4
KERNEL: WIND version 2.5
Made on Mar 23 2006, 18:04:52.
Copyright Wind River Systems, Inc., 1984-2000

CPU: CMM (Sparc-V9)/400. Processor #0.
Memory Size: 0x7600000 (118 MB). BSP version 1.0/0.

Portions of code copyrighted by Agranat Systems, Inc. All Rights reserved
Portions of code copyrighted by Alcatel Internetworking, Inc. 1994-2003. All Rights reserved
Portions of code copyrighted by Apptitude, Inc. 1997-1999. All Rights reserved
Portions of code copyrighted by Free Software Foundation, Inc. 1989,1991. All rights reserved
Portions of code copyrighted by The OpenLDAP Foundation 1999-2000. All rights reserved
Portions of code copyrighted by Theodore T'so 1994,1995,1996,1997,1998,1999. All Rights reserved
Portions of code copyrighted by RSA Security, Inc. All Rights reserved
Portions of code copyrighted by Sun Microsystems, Inc. All Rights reserved
Portions of code copyrighted by Wind River Systems, Inc. All Rights reserved
Portions of code developed by the University of California, Berkeley.
Portions of code developed by the Carnegie-Mellon University.

WDB: Ready.NVRAM boot parameters are out-of-sync with '/flash/boot.params'.
NVRAM boot parameters were updated using '/flash/boot.params'.
Starting dynamic software load from '/flash/certified/'...
Error setting inet address of ipc0 to 127.1.65.0, errno = 0x3d0001
sysStartWatchdog() Starting watchdog timer to INTERRUPT after 60 secs.

WED APR 07 09:25:47 : SYSTEM (75) info message:
+++ Switch Logging device '/dev/console' enabled for output

WED APR 07 09:25:47 : CSM-CHASSIS (103) info message:
+++ === Chassis Supervision Starting Up ===
Error in boot line:
(0,0) e=192.168.1.1:ffffff00 g=192.168.1.254 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff
^
+++ The certified version is used
+++ MONITORING ON
+++ This CMM is primary

WED APR 07 09:25:48 : PRB-CHASSIS (102) alert message:
+++ Fan #1 Failure!!
+++ Fan #2 Failure!!
+++ Fan #3 Failure!!

WED APR 07 09:25:48 : HSM-CHASSIS (101) info message:
+++ T1:Ni Insertion detected on slot 1
+++ T1:Ni Insertion detected on slot 2
+++ T1:Ni Insertion detected on slot 6

WED APR 07 09:25:49 : HSM-CHASSIS (101) info message:
+++ T1:Ni Insertion detected on slot 9
+++ T1:Ni Insertion detected on slot 10
+++ T1:Ni Insertion detected on slot 11
+++ T1:Ni Insertion detected on slot 14
+++ T1:Ni Insertion detected on slot 15
+++ T1:Ni Insertion detected on slot 16
Error accessing /flash/working/Fwebsecu.img . errno = 0x27100002

WED APR 07 09:25:51 : HSM-CHASSIS (101) info message:
+++ === HSM === Power Supply 2 is OPERATIONAL

Exception: Data Access Exception

Excepprogram counter: 0x05c4ff24
tionnext program counter: 0x05c4ff28
: Data Accepstate: 0x0000001e
fsr: 0x000000030f400820
ss Exceptaccess address: 0x25e4c33c
Task: 0x5e4c4b0 "SNMP GTW"


WED APR 07 09:25:54 : SYSTEM trap message:
Task 0x5e4c4b0 (SNMP GTW) priority 100. trapped
11a4c0 vxTaskEntry+c : snmp_udp_gtw(0, 0, 0, 0, 0, 0) fp=5e4c3d0

%pc = 5c4ff24 %npc = 5c4ff28 %ccr = 44 %y = 0
%asi = 0 %cwp = 6 %tt = 30 %tl = 1
%pil = 0 %pstate = 1e
%g0 = 0 %g1 = f %g2 = 0
%g3 = 0 %g4 = 0 %g5 = 0
%g6 = aad660 %g7 = dbdadeebff293c5b %i0 = 0
%i1 = 0 %i2 = 0 %i3 = 0
%i4 = 0 %i5 = 0 %fp = 5e4c3d0
%i7 = 11a4c0 %l0 = 7ffffff %l1 = 6d180a0
%l2 = 682ef68 %l3 = 6d23568 %l4 = 400001
%l5 = 6d18000 %l6 = 67ed000 %l7 = 3006c
%o0 = 1ffffffc %o1 = 5e4c340 %o2 = 1ffffffc
%o3 = 5e4c340 %o4 = 80000000 %o5 = 1
%sp = 5e4c1f0 %o7 = 5c4fed4

05c4fee4 d2022030 ld [%o0 + 0x00000030], %o1
05c4fee8 91326005 srl %o1, 5, %o0
05c4feec 93322000 srl %o0, 0, %o1
05c4fef0 a0100009 mov %o1, %l0
05c4fef4 92100010 mov %l0, %o1
05c4fef8 912a6002 sll %o1, 2, %o0
05c4fefc 9207bf70 add %fp, 0xffffff70, %o1
05c4ff00 96100010 mov %l0, %o3
05c4ff04 952ae002 sll %o3, 2, %o2
05c4ff08 9607bf70 add %fp, 0xffffff70, %o3
05c4ff0c 1b01c4c5 sethi %hi (snmp_sck), %o5
05c4ff10 98136020 or %o5, %lo (snmp_sck), %o4
05c4ff14 da032030 ld [%o4 + 0x00000030], %o5
05c4ff18 980b601f and %o5, 0x1f, %o4
05c4ff1c 9a102001 mov 1, %o5
05c4ff20 992b400c sll %o5, %o4, %o4
05c4ff24 d402c00a ld [%o3 + %o2], %o2
05c4ff28 9612800c or %o2, %o4, %o3
05c4ff2c d6224008 st %o3, [%o1 + %o0]
05c4ff30 1301c4c5 sethi %hi (snmp_sck), %o1
05c4ff34 90126020 or %o1, %lo (snmp_sck), %o0
05c4ff38 d2022030 ld [%o0 + 0x00000030], %o1
05c4ff3c 90026001 add %o1, 1, %o0
05c4ff40 933a2000 sra %o0, 0, %o1
05c4ff44 9407bf70 add %fp, 0xffffff70, %o2
ion
program counter: 0x05c4ff24

WED APR 07 09:25:54 : TELNET (80) error message:
+++ Cannot create IP socket, cmmTelnetLib.c, cmmtelnetd, 2961

WED APR 07 09:25:54 : SYSTEM (75) error message:
+++ Exception: Data Access Exception
next program counter: 0x05c4ff28
+++ program counter: 0x05c4ff24
pstate: 0x0000001e
+++ next program counter: 0x05c4ff28
fsr: 0x000000030f400820
+++ pstate: 0x0000001e
access address: 0x25e4c33c
Task: 0x5e4+++ c4b011 "a4c0SNMP GTWfsr: "
vxTaskEntry +c : snmp_udp_gtw (0, 0, 0, 0, 0 0x000000030f400, 8200)
5c4fed4 snmp_udp_gtw +94 : bzero
(1ffffffc, 5e4c340, 1ffffffc, 5e4c340, 80000000, 1)
18291c excEnter +100: 0 (30, 5e4c000, 0, 5e4c3c0, 5e4c3c0, f3ac0)
11192c excExcHandle +14c: csCsmAppliStrSend (5e4c4b0, 30, 5e4c000, &csCsmAppliStrSend, d73a0, 989680)
676ec6c csCsmAppliStrSend+16c: csCsmSendMsg (1, 1, 699771c, 5f63210, b0, 5e4bca0)
6789540 csCsmSendMsg +40 : zcSendto (1, 699771c, 5f63210, b0, 5e4bca0, 4)
71c2930 zcSendto +5b0: IpctaskUnlock (0, 18, 17, 4, ffffffff, 0)
71bf750 IpctaskUnlock +10 : semGive (6993658, &IpcGlobalSem, a, 2, 0, 32c400)
170f08 semGive +68 : semMGive (f, &semGiveTbl, 4, &semMGive, &semMTake, 3a)
17212c semMGive +20c: semMGiveKern (6993658, 243800, 1, 0, 0, 1)

WED APR 07 09:25:58 : CSM-CHASSIS (103) info message:
+++ CS excep handler: exception 48 in task 0x5e4c4b0

WED APR 07 09:25:58 : SYSTEM (75) error message:
+++ access address: 0x25e4c33c
+++ Task: 0x5e4c4b0 "SNMP GTW"

WED APR 07 09:25:59 : CSM-CHASSIS (103) alarm message:
+++
+++ **************** STR ****************
+++
+++ Level : ERROR DETECTED - APPLICATION FATAL
+++ Not an application managed by Chassis Supervision
+++ taskId : 0X05E4C4B0
+++
+++ Source file name : ??????
+++ Line number in the file : 0
+++ Error number : 0X00000030
+++ Comments : exception in task 0x5e4c4b0
+++
+++ Data Size : 00000040
+++ Data Address : 06D180A0
+++
+++ 0x05F63280 0000 0000 0000 0000 0000 0000 0000 0000 ................
+++ 0x05F63290 0000 0000 0000 0000 0000 0000 0000 0000 ................
+++ 0x05F632A0 0000 0000 0000 0000 0000 0000 0000 0000 ................
+++ 0x05F632B0 0000 0000 0000 0000
Exception: Data Access Exception
program counter: 0x05c4ff24
next program counter: 0x05c4ff28
pstate: 0x0000001e
fsr: 0x000000030f400820
0000 0000 0000 0000 ................
Exception: Data Access Exception
program counter: 0x05c4ff24
next program counter: 0x05c4ff28
pstate: 0x0000001e
fsr: 0x000000030f400820

+++
+++ ******************************************

WED APR 07 09:25:59 : CSM-CHASSIS (103) info message:
+++ !!!REBOOT!!!

WED APR 07 09:26:00 : CSM-CHASSIS (103) info message:
+++ !!! REBOOT WITH PMD !!!
+++ Application & Watchdog Monitoring Stopped
+++ !!!System will be reboot after the PMD dump. Please wait!!!

WED APR 07 09:26:05 : CSM-CHASSIS (103) info message:
+++ !!!PMD dump done. System is rebooting now!!!

rajashokkumar
Member
Posts: 4
Joined: 14 Dec 2011 08:41

Re: 7800

Post by rajashokkumar » 17 Apr 2015 14:52

Did you tried putting back the pin's in old position? I am not sure TAC still supports 5x release.

Oktay
Member
Posts: 2
Joined: 07 Apr 2015 02:55

Re: 7800

Post by Oktay » 21 Apr 2015 08:55

Yes I tried but its not working.

Thanks for your answer.

rajashokkumar
Member
Posts: 4
Joined: 14 Dec 2011 08:41

Re: 7800

Post by rajashokkumar » 24 Apr 2015 16:34

I believe somehow you files in the flash might be corrupted/deleted.

Check whether this post is helping..
viewtopic.php?f=189&t=14688&p=63036&hil ... ery#p63036

Post Reply

Return to “OmniSwitch 6600 / 7000 / 8800”

Who is online

Users browsing this forum: No registered users and 3 guests