Gents
has anybody some experience to setup a AOS switch authentication towards a Microsoft ISA Radius Server
We are busy with setting up telnet/ssh switch access authentication but have some problems to get authenticate
This is the error we get back for the switch prompt
"Authentication failure : Server configuration error, contact your administrator"
Do we need to configure a extra attribute file onto the Radius server for AOS switches and if yes do you have a example of such a file
Do we need to specify extra vendor-specific attributes, if yes which values do we need to enter
Thanks in advance,
Yves
telnet/ssh switch access Microsoft Radius Authentication
Re: telnet/ssh switch access Microsoft Radius Authentication
solution has been found with the following article from the alcatel knowledge base
https://service.esd.alcatel-lucent.com/ ... umber=2272
from page 118 on you can follow the steps and it will work.
https://service.esd.alcatel-lucent.com/ ... umber=2272
from page 118 on you can follow the steps and it will work.
Re: telnet/ssh switch access Microsoft Radius Authentication
I tried to go there, but need an acocunt. DO you have the document offline?
Re: telnet/ssh switch access Microsoft Radius Authentication
I was able to get the RADIUS configuration working with Active Directory. I have built a cheat sheet with Click by Click directions for setting up Authenticated Switch Access with OS6850E switches and MS Server 2008R2. Email me for the document if you want it.
Re: telnet/ssh switch access Microsoft Radius Authentication
I was trying to set up OS6850 aaa with MS Radius without success. Could you send me your cheat sheet? I'd appreciate.
Re: telnet/ssh switch access Microsoft Radius Authentication
Whipster, would like a copy of that cheat sheet also. If possible please send to normlippert@gmail.com
Thanks in advance...
Thanks in advance...
-
- Member
- Posts: 2
- Joined: 21 May 2019 06:53
Re: telnet/ssh switch access Microsoft Radius Authentication
I had the option to get the Span design working with Dynamic Catalog. I have fabricated a cheat sheet with Snap by Snap headings for setting up Validated Switch Access with OS6850E switches and MS Server 2008R2. Email me for the record in the event that you need it.
Re: telnet/ssh switch access Microsoft Radius Authentication
I can not access