ERROR: Out of TCAM processors on 1/1 (0) 6850

Post Reply
dpaiva
Member
Posts: 1
Joined: 08 Oct 2020 09:19

ERROR: Out of TCAM processors on 1/1 (0) 6850

Post by dpaiva »

I need support regarding an error message that appears when we are going to insert a new rule in the ACL of Swt Alcatel
Model Name: OS6860-24. Regarding the message below, is this a limitation of the Switch?


L3-STATCK-PTA-> policy network group v104-itsm 10.88.80.227 10.88.80.228
ERROR: Out of TCAM processors on 1/1 (0)

L3-STATCK-PTA-> show qos slice
slot/ Ranges Rules counters Meters
Unit Type Total Free Cam Total Free Total Free Total Free
1/1(0) IFP 24/24 0 256/252 256/252 256/256
1 256/255 256/255 256/256
2 256/5 256/5 256/256
3 256/0 256/0 256/256
4 256/0 256/0 256/256
5 256/0 256/0 256/256
6 256/0 256/0 256/256
7 256/0 256/0 256/256
8 256/0 256/0 256/256
9 256/0 256/0 256/256
10 256/0 256/0 256/256
11 256/0 256/0 256/256
12 256/0 256/0 256/256
13 256/0 256/0 256/256
14 256/255 256/254 256/254
15 256/255 256/256 256/256
1/1(0) EFP 0/0 0 256/256 256/256 256/256
1 256/256 256/256 256/256
2 256/256 256/256 256/256
3 256/256 256/256 256/256
slot/ Ranges Rules counters Meters
Unit Type Total Free Cam Total Free Total Free Total Free
2/1(0) IFP 24/24 0 256/252 256/252 256/256
1 256/255 256/255 256/256
2 256/5 256/5 256/256
3 256/0 256/0 256/256
4 256/0 256/0 256/256
5 256/0 256/0 256/256
6 256/0 256/0 256/256
7 256/0 256/0 256/256
8 256/0 256/0 256/256
9 256/0 256/0 256/256
10 256/0 256/0 256/256
11 256/0 256/0 256/256
12 256/0 256/0 256/256
13 256/0 256/0 256/256
14 256/255 256/254 256/254
15 256/255 256/256 256/256
2/1(0) EFP 0/0 0 256/256 256/256 256/256
1 256/256 256/256 256/256
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “OmniSwitch 6850 / 6850E”