lldp config on 6850

[mike18]

Hi Everyone,

What does below config do
lldp 1/7 tlv med network-policy enable
lldp 1/7 med network-policy 1


Regards
Mike

[silvio]

there must be a lldp med network policy 1 f.e. for phones. You can check with show configuration snapshot lldp.

Code: Select all

lldp network-policy 1 application voice vlan 2242 dscp 46

If now is at port 1/7 an ip-phone attached that is also speaking lldp med, than the switch tells the phone via lldp to 802.1q-tag with vlan 2242 and prio all voip packets with dscp 46.
regards
Silvio

[mike18]

Hi Silvio,

Yes there is config
lldp network-policy 1 application voice vlan 224 2 l2-priority 5 dscp 46

What does this network policy do if you can explain me in detail that will be greatly appreciated.

Happy Holidays

Mike

[silvio]

Hi,
like descriped in my last post:
is there an lldp-enabled phone attached to the port with the assiciated policy than the switch triggered the phone to 802.1q-tag with the vlan f.e. 2242 (and also to activate QoS).
regards
Silvio

[johnsheco]

MON OCT 10 09:31:15 2016 LLDP warning [Count.]Port 1/10
MON OCT 10 09:31:17 2016 LLDP warning lldpProcessInventoryTLV: Warning, MED Capabilities TLV is not first MED TLV on
MON OCT 10 09:31:17 2016 LLDP warning [Count.]Port 1/9
MON OCT 10 09:31:26 2016 LLDP warning lldpProcessInventoryTLV: Warning, MED Capabilities TLV is not first MED TLV on
MON OCT 10 09:31:26 2016 LLDP warning [Count.]Port 1/10
MON OCT 10 09:31:28 2016 LLDP warning lldpProcessInventoryTLV: Warning, MED Capabilities TLV is not first MED TLV on