Need help for stacking 6850E

Post Reply
damien123
Member
Posts: 2
Joined: 27 Aug 2018 20:26

Need help for stacking 6850E

Post by damien123 » 27 Aug 2018 20:31

Hi,

We are trying to replace a 6850E from a stack of 6 switches.
When the new unit is inserted, it gets into pass-through mode.
To recover from the pass-through mode, I did:
-> stack set slot 1001 saved-slot 5
-> reload pass-through 1001

The new switch has been assigned  slot number 5,
But it is still in pass-through mode and in the state: INC-SLOT
The stack manager tells that an element(251) enters pass-thru mode (incompatible mode)



Any idea?Thank you in advance.

Regards
You do not have the required permissions to view the files attached to this post.

damien123
Member
Posts: 2
Joined: 27 Aug 2018 20:26

Re: Need help for stacking 6850E

Post by damien123 » 28 Aug 2018 17:13

Hi,
The problem has been resolved by applying the below command:
stack set slot 5 saved-mode OS6850E
write me

User avatar
slixxboy
Member
Posts: 60
Joined: 29 Dec 2009 20:33
Location: Philippines

Re: Need help for stacking 6850E

Post by slixxboy » 28 Aug 2018 22:28

Hi, can you check the firmware the newly added switch into a stack switch, and compare it to other switches.

Post Reply

Return to “OmniSwitch 6850 / 6850E”