HELP CONFIGURE SWITC FOR NAGIOS

Post Reply
matteo_pelucchi
Member
Posts: 1
Joined: 28 Aug 2018 08:14

HELP CONFIGURE SWITC FOR NAGIOS

Post by matteo_pelucchi » 28 Aug 2018 08:20

Hello everyone,
I need to implement Nagios into my infrastructure but I don't understand how I can configure the switch to send the trap to Nagios and Nagios to receive the trap from the Alcatel switch.
Can anyone help me with the configuration???

I just need to configure cpu trap and temperature trap.

Many thanks in advantage.

Regards

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1223
Joined: 01 Jul 2008 10:51
Location: Germany

Re: HELP CONFIGURE SWITC FOR NAGIOS

Post by silvio » 28 Aug 2018 14:43

Hi,
per default all the traps are enabled. You only need to configure your nagios as snmp station.
I prefer to use snmp v3 with an user. Here an example:


aaa authentication snmp local
user SNMPV3 password SNMPV3PW read-write all sha+des
snmp station 10.10.254.1 SNMPV3 v3 enable

also in Nagios you need snmp v3 and the same user.

regards
Silvio

Post Reply

Return to “OmniSwitch 6850 / 6850E”