ERROR: Out of TCAM processors

Post Reply
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1886
Joined: 01 Jul 2008 10:51
Location: Germany

Re: ERROR: Out of TCAM processors

Post by silvio »

Hi,
I have tested the command without error at 6850E and 6450 (both with newest release). What is the result without the depth (only bw)?

Which release and which miniboot/uboot did you use? It's possible to update them?
regards
Silvio
sonktvt
Member
Posts: 2
Joined: 07 Nov 2012 22:21

Re: ERROR: Out of TCAM processors

Post by sonktvt »

Hi Silvio,
I using AOS 6.4.4.577 and u-boot mini-boot as below :

UBOOT Version : 6.4.3.565.R01,
UBOOT-miniboot Version : 6.4.3.565.R01,
POE SW Version : n/a
GBIC 3

KBI-Acc-6424-01# no policy rule rule4_egress
ERROR: internal error

KBI-Acc-6424-01# no policy rule rule4_ingress
ERROR: Out of TCAM processors on 1/0(0)
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1886
Joined: 01 Jul 2008 10:51
Location: Germany

Re: ERROR: Out of TCAM processors

Post by silvio »

I haven't a 6400 running at me. The newest build in 6.4.4 is 6.4.4.645
your Uboot/miniboot is ok.
In RN Ifind TCAM-error only in 6.4.4.540 (older than yours) - but often Alcatel has find the error internal and don't report this in RN. So please try an update of the image to build 645. Or open a SR at alcatel.
regards
Silvio
Post Reply

Return to “OmniSwitch 6400”