DHCP Server

[enima89]

Hello Everybody,
This my first post on ALcatel Unleashed and I'm also new to alcatel technologies. I'm working on a small network with an omniswitch 6400 series to which are connected two 6250 switches.

I want to use the 6400 switch as a dhcp server for the devices but when I enter the "dhcp-server enable" command, I get this message :
--------------------------------
"ERROR: Parse error for /flash/switch/dhcpd.conf & /flash/switch/dhcpd.pcy.
Please correct them & restart the DHCP server"
--------------------------------

How can correct the error or get the files mentioned (/flash/switch/dhcpd.conf & /flash/switch/dhcpd.pcy) and i also can't find the dhcp template file in the network folder. can anyone help me with the configuration steps of the dhcp server, please ?

Regards.

[benny]

You didn't try the search function yet, works fine for me ...

viewtopic.php?f=191&t=18888&p=82352&hil ... pcy#p82352

Try to do a "dhcp-server restart" first and then "enable".

B

[enima89]

Thank you benny, now the dhcp-server is enabled, but how do I make it give addresses to the different vlans ? I created a vlan 20 with a router address and assigned a port to it but when i connect a PC to it no addresse is assigned.