Hi everybody,
I bought an Omniswitch 6400 and had done some basic configuration:
ip interface vlan_1_name address 192.168.1.1 vlan 1
aaa authentication default local
changing passwort and name
The switch currently runs AOS 6.4.4.342.R01.
After that, I uploaded dhcpd.conf with the following content:
server-identifier vxTarget;
subnet 192.168.1.0 netmask 255.255.255.0 {
dynamic-dhcp range 192.168.1.100 192.168.1.255 {
option subnet-mask 255.255.255.0;
option dhcp-lease-time 8600;
}
}
Furthermore I have created an empty dhcpd.pcy file and uploaded both to /flash/switch
After that i promted the following commands
dhcp-server enable
dhcp-server restart
The output was: +++ /flash/switch/dhcpd.conf processed with 1 subnets
But by connecting a client to the switch, no ip address is given from the switch. What is wrong?
Thank you for your replies!