Hello;
I would like save the configuration with omnivista but i can´t.
When I try it the switch says:
%COPY-I-FILECPY: Files Copy - source URL flash://load destination URL tftp://xxx.xxx.xxx.xxx/load
01-Jun-2010 16:33:22 %TFTP-C-OPEN: No free UDP port
01-Jun-2010 16:33:22 %COPY-W-TRAP: The copy operation has failed
Somebody know what´s up?
Thanks a lot.
Problems with 6200 and backup configuration with omnivista
Hy Silvio, but it´s a strange problem because I have a computer with Omnivista and I can download the configuration of most of the 6200 but others give me the message:
When I try it the switch says:
%COPY-I-FILECPY: Files Copy - source URL flash://load destination URL tftp://xxx.xxx.xxx.xxx/load
01-Jun-2010 16:33:22 %TFTP-C-OPEN: No free UDP port
01-Jun-2010 16:33:22 %COPY-W-TRAP: The copy operation has failed
If I had problems with the firewall, I could not do any backup.
thanks
When I try it the switch says:
%COPY-I-FILECPY: Files Copy - source URL flash://load destination URL tftp://xxx.xxx.xxx.xxx/load
01-Jun-2010 16:33:22 %TFTP-C-OPEN: No free UDP port
01-Jun-2010 16:33:22 %COPY-W-TRAP: The copy operation has failed
If I had problems with the firewall, I could not do any backup.
thanks
This issue is known and it is a bug.
Upgrade to 1.7.0.23 or above to resolve it.
Here is the corresponding quote from the release notes:
Upgrade to 1.7.0.23 or above to resolve it.
Here is the corresponding quote from the release notes:
-bennyGeneral
Alcatel 0000530/Alcatel PR 136097/CQ 117372 (Version 1.7.0.23)
No free UDP port error when copying startup-config of backup to tftp ~100 times
Status: This issue was fixed
Regards,
Benny
Benny