SFP and 6212/6248

Post Reply
User avatar
MALEw
Member
Posts: 10
Joined: 05 Jan 2010 04:43
Location: CZE

SFP and 6212/6248

Post by MALEw » 26 Jul 2010 08:14

Hi Guys,
Have anybody experience with SFP - 100 - LC and Omnistack 6200 ??
I have two switches and two SFP (100-LC) and when i was trying connect togehter, so omniswitch wrote

%Box-I-SFP-PRESENT-CHNG: unit_id 1 SFP 0 status is present

but when i connected fibres, so i gave not link. This ports are configuration as fibre.
This fibres are single mode.

When i was connecting to Omniswitch 6850, so switch says


-> eniApplyPortConfig: Error::Invalid configuration while Medium 2 config lport
22
eniApplyPortConfig: set cfg params are enable 1, preferred 1, autoneg_enable 0,
force_speed 100, force_duplex 1, master 0, mdix 2, AN_Adv 8
eniSetPortAdvAndAutoNeg : Error::Invalid configuration setting preference for po
rt 22, unit 0, media 2
eniPhyPortEnable: Error::4 setting adv and auto neg for port 22, unit 0

Have you any idea ?

Thanks

Have a nice day

User avatar
slixxboy
Member
Posts: 60
Joined: 29 Dec 2009 20:33
Location: Philippines

Post by slixxboy » 02 Sep 2010 04:36

do check the compatibility issue on transceiver for 6850 & 6200.
You do not have the required permissions to view the files attached to this post.

User avatar
MALEw
Member
Posts: 10
Joined: 05 Jan 2010 04:43
Location: CZE

Post by MALEw » 02 Sep 2010 10:28

It already solved. These SFP were for MM (multimode) :/

Thanks for your help

Have a nice day

User avatar
cedric1
Member
Posts: 603
Joined: 26 May 2009 18:00
Location: Luxembourg ACSE R6

Post by cedric1 » 02 Sep 2010 15:54

so you have MM SFP connected to single mode fiber ?

this was the issue ?

User avatar
MALEw
Member
Posts: 10
Joined: 05 Jan 2010 04:43
Location: CZE

Post by MALEw » 03 Sep 2010 05:20

Yes, I DID, because our supplier said that these SFP are SM (single mode) so i didn't check this.

Post Reply

Return to “OmniStack LS 6200”