Traps Notification in Omnivista

[sacaminas]

Hello, I have a Omnivista 2500 and in a 6200 I recived always the same notification and i don´t know how I can solve it.
I show belong the capture:

Some Idea? Thanks a lot
PD: The switch in a 6200 Version 1.7.0.23

[cedric1]

hello

Did you have status change in speed, vlan config, setting on the port are well configured between 6200 and the other switch ?

Try to disable AMP on 6200 and enable it again .

Is this the only switch causing issue (same 6200 in you net witout this trap )

Cedric

[revexroe]

Hi!.
I have one question about 6200 LS Traps Notificacion in Omnivista. I have a network with a lot of Omnistack (about 60) and a few of Omniswitch 6850 ( 5 exactly) and one Omnivista 2500 3.4
The snmp works good in all switches, buy i only have traps notification from the omniswitches, none of the 60 omnistack send any traps, and they have a lot of messages!!!!
I configured the Trap Station Management y enable trap notification.

What else??

Thanks a lot !