LS6200 rebooting when radius server is configured

Post Reply
User avatar
Q-Ant
Member
Posts: 32
Joined: 12 Mar 2010 09:38

LS6200 rebooting when radius server is configured

Post by Q-Ant » 10 Nov 2010 08:28

Hi all,

I have several LS6200 switches that reboot the second I enter the radius server into the switch ("radius-server host 1.2.3.4 auth-port 1812 key SoMeKeY usage login")

This happens only the first time command is entered, switch reboots (ofcourse it looses the unsaved configuration) and from then on there are no issues with radius configuration or functionality.

Any ideas why this is happening?

These are the version of HW/SW:
SW version 1.7.0.13 ( date 23-Oct-2008 time 12:12:55 )
Boot version 1.0.0.12 ( date 19-Oct-2006 time 09:07:37 )
HW version 00.00.01

These are some of the console outputs, not all of them produced these:
***** FATAL ERROR *****
%AAA-F-UDPBINDERR: Radius failed to bind to UDP
Reporting Task: AAAT.
Software Version: 1.7.0.13 (date 23-Oct-2008 time 12:12:55)
0xa7e60
0x44a79c
0x2b5ae4
0x2b5fa0
0x2ba020
0x2ba130
0x348384
0x348d18
0x288be8
0x2685dc
0x34c774
0x3cbd10
0xa05e0
^^ this event was logged before the last reboot.
***** END OF FATAL ERROR *****

User avatar
cedric1
Member
Posts: 603
Joined: 26 May 2009 18:00
Location: Luxembourg ACSE R6

Post by cedric1 » 10 Nov 2010 11:16

hi

start with an update ...

Post Reply

Return to “OmniStack LS 6200”