How to Connect LS 6248

Post Reply
Bavaria
Member
Posts: 1
Joined: 31 May 2013 03:22

How to Connect LS 6248

Post by Bavaria » 31 May 2013 03:30

Hello,

there is no answer from the machine, using console cable.

i´ve got here an Switch Omnistack LS 6248.
I try to connect this Switch by console.
I got the console cable and connected it, at serial Port on PC.

I use putty to connect. there i chosse Connection Type Serial, Speed 9600.
But there is no answer from the machine. Even if I try STRG+Y.

Some Ideas?

Greetings

devnull
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 942
Joined: 07 Sep 2010 10:16
Location: Germany

Re: How to Connect LS 6248

Post by devnull » 03 Jun 2013 12:01

Wrong console cable?
You must use an Alcatel Adapter (no blue Cisco cable!) and a standard Ethernet cable.

Putty Settings are 9600 8 N 1, nothing checked at flow control..

(just tested with a 6248P, works fine)

Post Reply

Return to “OmniStack LS 6200”