Hello,
I can not change the mtu value on a 6224 Switch
The intention is to bring the MTU value of default 1,500 to 1,400
This is what I tried :
WGS- 01 # configure
WGS -01 ( config) # interface vlan 1
WGS -01 (config -if) # mtu 1400
% Unrecognized command
What I have tried are:
WGS- 01 # configure
WGS -01 ( config) # interface range ethernet all
WGS -01 (config -if) # channel -group 1 mode on
ch1 can not have more member ports
ports
ch1 can not have more member ports
WGS -01 (config -if) # mtu 1400
% Unrecognized command
Software Version : 1.5.1.7
Boat version: 1.0.0.12
HW : 00:00:01