4504 controller

[ram]

Hi ,

What is the procedure to break or reset the password in omniaccess wlan controller 4504.

Please some one help me on this it's urgent.

Regards,
Ram

[jlettinck]

Hi Ram,
Could you try the following using the console cable:

User: password
Password: forgetme!
(OAW4308) > enable Password: enable
(OAW4308) # configure terminal
(OAW4308) (config) # mgmt-user admin root password # ********* Re-type password # ********
(OAW4308) (config) # exit
(OAW4308) # exit
(OAW4308) > exit User: Then login with username admin with the password you used.
The Enable password is set to "enable"

Please let us know if it worked for you.
Good luck

[ram]

Hi jLettinck,

Thanks A lot man I will try this. as of now we are using Ap61 access point now we are going to implement 4 no of Ap 105 access point we have enough license in the controller. is it Ap 105 will Compatible For 4504 controller . Please Let me know .
it's urgent. we have to choose the product that will compatible for 4504 controller.


Regards,
Ram

[jlettinck]

Hello Ram,

All the AP's are compatible with the OAW-4504 controller. The AP-6x series are end of life, however still supported on the latest 6.1.x release, so there should be no problem should you upgrade.
The AP-105 is absolutely supported.

Best regards,
Jeroen

[ram]

Hi Jlettinck,

I am waiting for client confirmation to break the password in controller.

If i break the password in 4504 controller means is there any chance to losing my current configuration...?

Kindly let me know .

Regards,
Ram

[jlettinck]

There will be no loss of configuration. You just reset the admin account password.

[ram]

Hi Jlettinck,

Thanks a lot man , we are successfully reset the password.

whether his method is applicable for all wlan controller ...?

Regards,
Ram.

[jlettinck]

As far as I know it should work on all wlan controllers models

[ram]

thanks a lot man .

[kent2612]

Is Hewlett Packard AP (Model: APIN0207) compatible with 4504-XM WLC? Thanks in advanced.