We have installed the AP205H with controller 4450. we have to connected IP phone behind AP but there is no power. AP is connected behind the 6450-P48.
Please advise how to activate POE port to connect IP phone behind AP205H.
Regards
AP 205H POE out disable
Re: AP 205H POE out disable
inside the AP is a "normal" switch without POE. Only RAP3WNP (with own powersource) delivered POE.
You need powersupply for your phone or an injector.
regards
Silvio
You need powersupply for your phone or an injector.
regards
Silvio
- mustafa.ahmad
- Member
- Posts: 253
- Joined: 27 May 2010 03:23
Re: AP 205H POE out disable
I am using AP305H
it has one in built POE port, mentioned in the docs
it has one in built POE port, mentioned in the docs
- mustafa.ahmad
- Member
- Posts: 253
- Joined: 27 May 2010 03:23
Re: AP 205H POE out disable
sorry it s 205 H
Re: AP 205H POE out disable
check in your OAW if poe is enabled.
wireless lan - your ap group > AP > Ethernet interface 1 port configuration > Ethernet interface link > POE
You are realy sure that you don't need an external powersupply at the AP? I haven't seen this AP until now.
regards
Silvio
wireless lan - your ap group > AP > Ethernet interface 1 port configuration > Ethernet interface link > POE
You are realy sure that you don't need an external powersupply at the AP? I haven't seen this AP until now.
regards
Silvio
Re: AP 205H POE out disable
Also: From Datasheet the AP205 provides 5W maximum, so check that your phone does not use more power
(have not had such AP yet)
(have not had such AP yet)