We support GIXEN, the eBay sniper.
Best Buy Co, Inc.

MIPT 81X8 -> DHCP <-> static IP Configuration

Post Reply
Chris-tian-Baden
Member
Posts: 5
Joined: 15 Jan 2013 05:50

MIPT 81X8 -> DHCP <-> static IP Configuration

Post by Chris-tian-Baden » 10 Jul 2014 08:59

I`ve got an question. If an MIPT recieves the IP per DHCP Server and the dhcp doens`t deliver an tftp Server address.
Will then the static config tftp in the 81X8 work or not?
Which adjustment ist higher in hierarchical addressing? DHCP or Static?

kind regards
ACFE ICS, ACFE AOS, ACFE OAW

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 949
Joined: 01 Jul 2008 10:51
Location: Germany

Re: MIPT 81X8 -> DHCP <-> static IP Configuration

Post by silvio » 11 Jul 2014 12:07

In my knowledge the static confic (via winpdm) is prefered.
regards
Silvio

Chris-tian-Baden
Member
Posts: 5
Joined: 15 Jan 2013 05:50

Re: MIPT 81X8 -> DHCP <-> static IP Configuration

Post by Chris-tian-Baden » 13 Aug 2014 05:56

Thx, we found another solution to differentiate between 4 nodes, we chancged the "vendor class" in two mipt (to test) an the dhcp-server differntiates based of the "vendor classes".
We called them simply for e.g. "node1.class", "node2.class".....so it`s flexible and everything is done by dhcp server:-)
regards
chris
ACFE ICS, ACFE AOS, ACFE OAW

krishjan
Member
Posts: 1
Joined: 26 May 2016 07:06

Re: MIPT 81X8 -> DHCP <-> static IP Configuration

Post by krishjan » 19 Oct 2016 08:16

Hi Chris
I am trying to register my mipt 8118 via dhcp. Option 66 is used by a different manufacturer device. How do i set vendor class on mipt and on dhcp server so I can override option 66?
Thanks,
krishjan

Post Reply

Return to “Mobile IPTouch Phones (MIPT)”

Who is online

Users browsing this forum: No registered users and 1 guest