8118 winpdm

Post Reply
dreyol
Member
Posts: 2
Joined: 04 Apr 2012 07:51

8118 winpdm

Post by dreyol » 03 May 2012 10:47

Hi!

I am trying to configure the first 8118 phone using winpdm. I have checked all TCs and Docs I could find, but i couldn't find the answer to the simple question: Where do i get the templates and parameter files needed for winpdm?

thanks in advance

dreyol
Member
Posts: 2
Joined: 04 Apr 2012 07:51

Re: 8118 winpdm

Post by dreyol » 04 May 2012 08:23

Found it. The parameter definitions are included in the firmware files, which can be downloaded from the business partner site.

User avatar
beirut
Member
Posts: 69
Joined: 02 Feb 2010 13:49

Re: 8118 winpdm

Post by beirut » 16 May 2012 16:36

Hi, I am having the same issue, under which directory you were able to find the templates?

ysakaly
Member
Posts: 1
Joined: 11 Dec 2013 12:41

Re: 8118 winpdm

Post by ysakaly » 07 Nov 2014 06:42

Hi,
I will be very interested to have an answer to that point . very concerned about this on an install actually.

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1223
Joined: 01 Jul 2008 10:51
Location: Germany

Re: 8118 winpdm

Post by silvio » 09 Nov 2014 06:34

Depending of the image of the phones you has to add the parameter definition file (.pkg) into WinPDM. You have to unzip the phone Software and via File management - Add you search for the pkg-files for 8118 and/or 8128.
Only with the correct pkg-file you can config via WinPDM the phones.
Template is an other point. Templates where used to save offline a config for your installation - you can use template to quick config a lot of phones.
regards
Silvio

Post Reply

Return to “Mobile IPTouch Phones (MIPT)”