Hi
i have successfully connected to the SSID,
and got the required IP Address and TFTP address
but the 8128 still stuck at connecting screen
able to do a ping to the 8128 Phone ip address
OXE Release : R11.0-k1.400-25-f-sg-c7s2
DHCP on OXE
created class : alcatel.mipt.1
alcatel.mipt.0 has been created by default
did lanpbxmipt -auto also
Controller used : Aruba
AP used : AP 93
please advice
8128 stuck in "connecting" screen
Re: 8128 stuck in "connecting" screen
All the phones
- Konstantinos.E
- Alcatel Unleashed Certified Guru
- Posts: 616
- Joined: 12 Jan 2010 04:15
- Location: Honolulu
Re: 8128 stuck in "connecting" screen
Just an idea
try to give static ip configuration and if the phone gets in service then give DHCP.The phone must download cfg file from the pbx. I had this problem in the past and i solve it this way. There is a tftp option in controller that must be provided to the DHCP request to allow tftp download to get this file .i suppose thats why show connecting..
try to give static ip configuration and if the phone gets in service then give DHCP.The phone must download cfg file from the pbx. I had this problem in the past and i solve it this way. There is a tftp option in controller that must be provided to the DHCP request to allow tftp download to get this file .i suppose thats why show connecting..
Alca_holic
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: 8128 stuck in "connecting" screen
All the phones..? Did you setup your lanpbx.cfg file ?
Code Free Or Die
Re: 8128 stuck in "connecting" screen
Solved,
There's no return path in the router between the 2 network
Thanks
There's no return path in the router between the 2 network
Thanks