MIPT 8128 not working after HP MSM upgrade

Post Reply
rizwan_101
Member
Posts: 13
Joined: 06 Feb 2012 02:19

MIPT 8128 not working after HP MSM upgrade

Post by rizwan_101 » 19 May 2015 04:21

Dear All,

I have upgraded HP Wireless Controller from firmware version 5.4.7 to 6.4.2 and after that all my MIPT's are showing connecting message and are not able to connect to OXE.

My MIPT's are having firmware version 5.1.30.

Pleae help me if someone has idea about this problem.

Thankyou.

BR,
Rizwan

esmat
Member
Posts: 1
Joined: 14 Aug 2015 18:03

Re: MIPT 8128 not working after HP MSM upgrade

Post by esmat » 16 Aug 2015 04:36

I have the same issue , any ideas please

sherif
Member
Posts: 40
Joined: 01 Jul 2008 15:59
Location: Egypt

Re: MIPT 8128 not working after HP MSM upgrade

Post by sherif » 31 Aug 2015 06:08

Hi

we faced the same issue with HP AP MSM 430 and CONTROLLER MSM 760. and the problem has been solved and tested on firmware 6.6.0.0 by activated the following option on the controller

Advertise Tx power : True --> this option support 802.11h and 802.11d which is mandatory for Alcatel OT81x8

Also you have to adjust AP to use only Channel 1 , 6 , 11 (Alcatel OT81x8 is working only on those channels).

Regards
Sherif

Post Reply

Return to “Mobile IPTouch Phones (MIPT)”