Connect a cable for debug in the front bus of an INT-IPx

This is the main discussion forum, if the subject that you want to talk about is not listed around here.
Post Reply
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3169
Joined: 06 Jul 2004 00:18
Location: New York
Contact:
Contact frank

Connect a cable for debug in the front bus of an INT-IPx

Post by frank »

HI !

On any 4.2 release with an INT-IP board, I was able to connect a blue cisco cable (RJ45 <--> V24) on the front bus of the board and have a look at the boot sequence. Since 5.x and INT-IP & INT-IP2, I am not able anymore to do that.. Anyone does it and can tell me how ?

Thank you
Last edited by frank on 17 Nov 2004 09:33, edited 1 time in total.
Code Free Or Die
Top
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3806
Joined: 23 Sep 2004 06:47

Post by vad »

This is not release problem, INTIP and INTIP2 have different V24 cable. INTIP2 have v24 cable like GD board.
Top
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3169
Joined: 06 Jul 2004 00:18
Location: New York
Contact:
Contact frank

Post by frank »

Thanks for the trick.
I will order one from Alcatel..!
Code Free Or Die
Top
Post Reply

Return to “MAIN”