no connectivity on switch when connecting with E0 port

This is the main discussion forum, if the subject that you want to talk about is not listed around here.
Post Reply
User avatar
mustafa.ahmad
Member
Posts: 222
Joined: 27 May 2010 03:23

no connectivity on switch when connecting with E0 port

Post by mustafa.ahmad » 15 Feb 2018 03:00

Hi,

When we are connecting the E0 port of crystal CPU7-2 to a switch ( Juniper EX4300 ) , there is no connectivity on the network and also the Eth light of CPU does not light on.

But when a laptop is connected to E0 port , then we are able to access the CPU and also if the laptop is connected directly to the switch port, it gets connected to the LAN network.

It has been tried with other ports of the switch also, but the situation is the same.

Thanks

Turlupin
Member
Posts: 86
Joined: 05 Jun 2007 07:59
Location: Paris / France

Re: no connectivity on switch when connecting with E0 port

Post by Turlupin » 15 Feb 2018 09:02

Hi,

May be you need a cross cable with the E0 port.
On the CBRMA/Connecting box you can use jumper to cross the ethernet port.

Regard,

Turlupin
Sorry for my english .... :)

Post Reply

Return to “MAIN”