Cpu -7 managment stuk after login password

This is the main discussion forum, if the subject that you want to talk about is not listed around here.
Post Reply
Muhammad alam
Member
Posts: 11
Joined: 30 Jan 2018 11:33

Cpu -7 managment stuk after login password

Post by Muhammad alam »

Hi,
Sir i m facing problem regarding cpu7 manegment stuk on main . Following incident appear continuosly.
IPC:Th[1183-dis25] cannot malloc a message structure.
I prepare the new hard disk but after 10 hour approx it happen again. Kindly guide me
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Cpu -7 managment stuk after login password

Post by cavagnaro »

Malloc sounds more to me a memory issue. Or cpu maybe...
Try to change the memory slots RAM

Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Muhammad alam
Member
Posts: 11
Joined: 30 Jan 2018 11:33

Re: Cpu -7 managment stuk after login password

Post by Muhammad alam »

Sir,
I have change every thing like ram, cpu7, io2n board but still problem there. Now problem comes after 26 to 30 hour after.
Muhammad alam
Member
Posts: 11
Joined: 30 Jan 2018 11:33

Re: Cpu -7 managment stuk after login password

Post by Muhammad alam »

Sir ,
Total user in node is 2200 analog+ digital. And RAM is 256. Is there Low RAM memory problem. Or cpu7 can handle it?
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Cpu -7 managment stuk after login password

Post by cavagnaro »

I don't know...when you run actis it should automatically upgrade the CPU if needed.
Was this working before?
Something changed?

Have you tried another cpu? Would work for 30 days but would let you know what the problem is


Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Post Reply

Return to “MAIN”