COFF file allocation

[kalel]

Dear all,

Please help. I am trying to load a software from a spare HD, since my HD crashed, I have searched other post and read the documentation since this is the first time I am doing this. I am stock with this error.. do I have the correct file allocation??

I have use this software file before and it works when I do it before on partiotion installation.

Please help I've been studing this for about a week and Im stock with this...

Thanks in advance

Booting From Ethernet Network
Updating bootinfo

ACT4400 specific INSTALLATION data input:
=========================================
Standard installation (y/n, default is y) ? :

TEL version ? : e25022.sa

Phase 1: address determination and bootfile selection
=====================================================

NB: All parameters below are optionnal.

Default internet Address : *** Unknown ***
New Internet Address : 10.65.26.75


Name of default BOOTP/TFTP server : *** Unknown ***
Name of a new BOOTP/TFTP server : 10.65.26.74


Default loaded file :
New loaded file : C:/dhs3mgr/e2502/pcmao/boot_res/bootp/linux

BOOTP request in progress ............
Netmask : 255.255.255.0
Our Hostname : OXE_1 (10.65.26.75)

TFTPLOAD STARTED - Server TAIF-CCS - File Name C:/dhs3mgr/e2502/pcmao/boot_res/b
ootp/linux
Not a COFF file.
Status : cNotOK

Boot Menu :

1 - Booting From Floppy #0
2 - Booting From Floppy #1
3 - Booting From Hard Disk #0
4 - Booting From Hard Disk #1
5 - Booting From Ethernet Network
6 - Default Boot Sequence

[kalel]

Its working if I point to this file, but I cannot continue with the second stage

File Name C:/dhs3mgr/e2502/pcmao/boot_res/bootp/linux/18.0/linux.ram

[murraya]

Hi, when asked for new load file try putting %18.0
It should then find the files needed.

[murraya]

also I think the last patch for this version is e25022p. It's always good to put the latest patch on.

[kalel]

thanks you very much murraya.... its now loading... i didnt find this in the dox... thanks again your the best!!!