A4400 upgrade release 9.1 to release 12

[maphi]

Hi,

I try to upgrade the pbx to release 12 but my cpu reboot always.
I tried to start without IO2N but nothing is changed.
The bios is good.
Thx

[vad]

What is your question? Competition - who is the first to guess the right answer?

Some description - CPU type, some problems during upgrade, reason for reboot (logs, incidents)...

[oldboy]

What is your question? Competition - who is the first to guess the right answer?

Some description - CPU type, some problems during upgrade, reason for reboot (logs, incidents)...

Hahahahaha was thinking the same thing.

Is it a new cpu or new harddrive as this is required fro Rel 12....???? i will keep guessing!

[maphi]

Hi,

it is a cpu 7-2 (oud board) with a new HD

[haroun]

bios! new bios even os has changed from rhlE to Centos

[maphi]

the bios is already new... of course
the cpu reboot always just after the putting of the database of the customer

[oldboy]

When you took the DB off the 9.1 system did you do a recover of the DB?? using fichges?

[vad]

You install r12 - CPU works Ok?
You restore (via swinst) old database.
You load new OPS files.
You set autostart and reboot CPU.

And after - your CPU rebooted again (when DHS3 started)?
1 - show log/incidents
2 - in old database IO2N declared and now physically removed?

[maphi]

I will try next week thx