PC installer 5,2 problem to load R12,1 & R12,2 correctly

PCInstaller, it's tricks, it's problems...
Post Reply
milinn
Member
Posts: 9
Joined: 01 Nov 2016 04:08

PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by milinn » 03 Sep 2018 08:02

Hi guys,

I got problem with BOOT new CPU's with new binaries. I try to load R12,1 (M230021a) to CS-3 with PC installer 5,2. But always got warning with this : 'install/config/https:/hdlist': path not reachable in Linux version 117.000. and If I click on continue it will appear another warning with : 'install/config/https/swinst-3.23.0-4oxe.i386.rpm': path not reachable in Linux version 117.000. when I try to boot CPU with this warn everything is OK but at the end of booting last files from the linux (M2300) it will appear ERROR: FTPD:produced following error message: cannot fork acceptor: Resource temporarily unavailable. When I click continue nothing happend and when I try to click on modify at PC installer, sudenly intaller in CPU continue working with intalling files. Now I dont know If the warned file swinst was installed or not. But when I try after BOOT try to open swinst everything works fine.

Same problem I have with R12,2 (M340213F) same warning, same error.

I try to BOOT it from 3 computers and always same error. With Release R11,2 and R12 have no problem but with these new one cant BOOT without error or warnings. Is there someone who have same problem like me ? Or what should I do for find any solution to BOOT it correctly?

User avatar
oldboy
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 743
Joined: 25 Aug 2005 18:24

Re: PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by oldboy » 03 Sep 2018 11:41

you need to use pc installed 5.4 which is in the 13F patch folder, otherwise you must use SOT to install CPU's
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."

oxeman4400
Member
Posts: 21
Joined: 23 May 2012 15:27

Re: PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by oxeman4400 » 04 Sep 2018 01:16

Hi.
I tried with 5.4 but the problem still exists.please let me know what is the SOT?
Yours.

User avatar
oldboy
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 743
Joined: 25 Aug 2005 18:24

Re: PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by oldboy » 04 Sep 2018 04:52

i loaded 5.4 yesterday and now it works fine as i was getting the same error when selecting ,y OXE version, as per the documentation anything below 5.4 12.2 cannot be loaded using PC Installer.

Software Orchestration Tool (S.O.T.) can be downloaded from the BPWS and it runs as a Virtual Machine, it works well.
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."

oxeman4400
Member
Posts: 21
Joined: 23 May 2012 15:27

Re: PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by oxeman4400 » 04 Sep 2018 07:11

oldboy thank you for your help.I will try it again.
Yours.

milinn
Member
Posts: 9
Joined: 01 Nov 2016 04:08

Re: PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by milinn » 04 Sep 2018 08:11

for me it works, ty :)

mdhussainvlr
Member
Posts: 129
Joined: 13 Nov 2017 01:42

Re: PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by mdhussainvlr » 04 Sep 2018 13:17

It’s a software issue try install the hot fix for me the same issue came then it got resolved by applying hot fix

Check it in TKC

oxeman4400
Member
Posts: 21
Joined: 23 May 2012 15:27

Re: PC installer 5,2 problem to load R12,1 & R12,2 correctly

Post by oxeman4400 » 05 Sep 2018 03:13

Use PCInstaller 5.4 or above. It is available with patch l2.300.41, m1.403.22.a, m2.300.21.a, m3.402.13.f in directory : \pcmao\boot_res\pcinstall

Thank you mdhussainvlr
Yours.

Post Reply

Return to “Software Loading”