PCS Database update error

[MR_PT1]

Hi,

After the upgrade from R9.0 h130128b to h130134, I'm having problems to copy the database from the Main Call Server to PCS.

I tryed to launch the pcscopy command --> 1 - PCS Update --> after some seconds the message "End NOK: Restore on PCS failed" is showed.

When I launched the incvisu command was showed; 09/10/09 15:47:02 000001M|---/--/-/---|=3:0433=PCS 10.210.126.5: Database update: error 6 info 11.

Somebody have any idea about this?

[krzysioD]

Well,

viewtopic.php?f=24&t=7308


Some R&D guy is going to RTFM for rhost/rlogin in next few months or this will not be solved.
One of many bugs in R9.

[MR_PT1]

Well,

viewtopic.php?f=24&t=7308


Some R&D guy is going to RTFM for rhost/rlogin in next few months or this will not be solved.
One of many bugs in R9.

It was working in R9.0-h1.301-28-d. I think the bug is in patch h1.301-34...

[Gedeon]

You can test to add your main (and physical) CPU address in netadmin on PCS as hosts (Choice 9 if my memory is good).
Any hosts added by netadmin can use rhosts features normally (but I have not AS to test this actually).

G.

[krzysioD]

I've thought so, but...
In latest patch there is a need to use vi editor and add some IPs by hand...

[MR_PT1]

You can test to add your main (and physical) CPU address in netadmin on PCS as hosts (Choice 9 if my memory is good).
Any hosts added by netadmin can use rhosts features normally (but I have not AS to test this actually).

G.

It's already added in netadmin on PCS. The settings before the upgrade are the same, but just don't work anymore. I will try to configure the PCS and maybe load the software again today.
Thanks...

[MR_PT1]

I did the configuration in the inactive partition and it's working again.