ssd instead of hdd

Post Reply
zetor2000
Member
Posts: 40
Joined: 22 May 2012 05:08

ssd instead of hdd

Post by zetor2000 »

Hi,

I own a PBX with rel. 6.0, CPU6 with HDD, but i would like to utilize SSD. I swap the hdd, and cloned it to the ssd, but it doesn't start, just say:
HDA: status timeout... (hex value)
HDA: no DRQ after issuing write
IDE0 reset: success

Does anybody know, what i have to patch, or do to work with ssd?
User avatar
enio.eltz
Senior Member
Posts: 1058
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: ssd instead of hdd

Post by enio.eltz »

Hi

I think it is not possible. I don't think rel. 6.0 and CPU6 could support SSD.

Best regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: ssd instead of hdd

Post by cavagnaro »

Why an expensive SSD for a 133hz CPU? Better use it on your laptop
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
haroun
Senior Member
Posts: 1355
Joined: 29 Mar 2010 11:09

Re: ssd instead of hdd

Post by haroun »

CAV lol
or migrate your own R-6 ,they are now R11 MAN
zetor2000
Member
Posts: 40
Joined: 22 May 2012 05:08

Re: ssd instead of hdd

Post by zetor2000 »

Upgrading my PBX network is very expensive, because i am using a lot of PBXs.
I had noticed that HDDs are the weakest part of these PBXs, because they are spinning 24/7.
But we bought several IDE SSD in the past and we cannot use them because they are 32GBs, and they have IDE interface not SATA.
But if you can send me some files to migrate my PBXs, i would be very glad.

I did some google, and i suppose there is a hdd driver changes/modifications in the kernel, so i have to change the kernel... but i am not a guru...
User avatar
alex
Senior Member
Posts: 1457
Joined: 06 Jul 2004 07:27
Contact:

Re: ssd instead of hdd

Post by alex »

zetor2000 wrote:
i suppose there is a hdd driver changes/modifications in the kernel, so i have to change the kernel...
That's exactly to the point.
AFAIK you need at least 2.6.3x kernel to support SSD - in R10.1.1 it's 2.4.17-11-dhs3 - you could seee from that name that it is specific build for dhs3.
On older kernels you SSD won't stay long due to intensive SSD write operations (swap, DB etc) - and we all know that flash memory has limitations on write cycles.
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
User avatar
enio.eltz
Senior Member
Posts: 1058
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: ssd instead of hdd

Post by enio.eltz »

I had noticed that HDDs are the weakest part of these PBXs, because they are spinning 24/7.
Yes, it may be the weakest part, but it was developed this way. In my opinion, you shouldn't look for something that would cause more headache, changing HDD to SSD. If you are worried about your HDD, replace it each three years. Remember: ALU developed a huge system called OXE with HDD, they knew what to do. This is my opinion. And as haroun wrote, check the upgrades. I understand it is very expansive, but it is the best option. Don't look for headaches.

Best regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
Post Reply

Return to “Linux tricks”