4XX8EE Phones with Asterisk

[Reinoud]

Are you sure you have an EE set? It should say on the sticker on the back: "extended edition".

[rmckeon]

The set I was testing with was not EE I was a bit confused whether or it HAS to be EE to work with SIP, but I guess it's confirmed now. I got my hands on a 4018EE set now and will test...

[rmckeon]

It's the same exact issue with a 4018EE. Doesn't even let me change to SIP version manually from the phone LCD screen, it just stays on NOE and beeps when I press OK to try and change it to SIP, but nothing happens.

[paldon66]

Goodmorning everyone. I'm desperate not to run the alcatel one touch 4018 ip phone with my ip elastix switchboard. WHO can you help me setp by step ? at the moment i only understand that i have to configure configuring a tftp server in windows and then? thank you

[krzysioD]

well, it was discused so many times, then i really don't know wat to say.
you dont need a tftp server and not need a windows, http and linux also will work, if you have any log - that methods mentioned here and in alcatel docs have failed, pls attach, if no - please read.

[robingerritsen]

How did you do this?
I have tried to use the same config replaced with my server configs.
I get the following message: No Registration

Does anyone know how to connect a ip touch 4018 with 3CX?
Thanks

Good morning all,

I have succesfully setup a number of 4008 and 4018 phones to work with 3CX.

The issue i am having is setting the buttons for Transfer etc.

Any ideas on this?

please find my sample config (thanks Reinoud)

Code: Select all

###########################################################################

#                                                                         #

#         4008EE / 4018EE SIP-Touch sets configuration file               #

#         SIP : 2.00.81 & 2.00.90                                         #

#                                                                         #

# This example contains all parameters which may be managed via the       #

# config file and is in line with 3AK_29000_0285_PEZZA_17                 #

#                                                                         #

###########################################################################







###########################################################################

## Syntax informations :

##

## All parameters are grouped by sections (the section name is specified

## with the syntax [section1]). The content is UTF-8 encoded

## Each configuration item uses a single line with a "key=value" pattern

## "Key" content starts at the first none-space character and ends with "="

## or " ="

## "Value" content starts at the first none-space character and ends at the

## "\n\r"

## If the value is empty, the terminal should use the default value instead

## Lines starting with "#" will be ignored as a comment 

## The items of a list are separated by a ","

###########################################################################





[dns]



###########################################################################

## The primary DNS IP address HAS TO BE FILLED

## If no DNS, use the SIP proxy address instead

###########################################################################

   dns_addr=192.168.10.7

   dns2_addr=

   hostname=itscomputers.co.za





[sip]



###########################################################################

## Domain name : IP address, FQDN or domain name (see the SIP proxy config)

###########################################################################

   domain_name=192.168.10.50

###########################################################################

## Primary SIP proxy and SIP registrar settings

##

## Proxy address : IP address, FQDN or domain name

## Registrar address : IP address, FQDN or domain name (usually, the proxy)

## SIP proxy UDP port : usually 5060

## SIP registrar UDP port : by default 5060

###########################################################################

   proxy_addr=192.168.10.50

   proxy_port=5060

   registrar_addr=192.168.10.50

   registrar_port=5060

   outbound_proxy_addr=

   outbound_proxy_port=

###########################################################################

## Redundancy settings

##

## Proxy address : IP address, FQDN or domain name

## Registrar address : IP address, FQDN or domain name (usually, the proxy)

## SIP proxy UDP port : usually 5060

## SIP registrar UDP port : by default 5060

## sip_transport_mode_survi : Transport mode in PCS mode 

##          0 = UDP or TCP

##                  1 = UDP

##                  2 = TCP

###########################################################################

   proxy2_addr=192.168.10.50

   proxy2_port=5060

   registrar2_addr=192.168.10.50

   registrar2_port=5060

   outbound_proxy2_addr=

   outbound_proxy2_port=

   pcs_addr=192.168.10.50

   pcs_port=5060

   sip_transport_mode_survi=0

   option_timer=120

###########################################################################

## Global SIP parameters

## Transport mode : 0 = UDP or TCP

##                  1 = UDP

##                  2 = TCP

## local_rtp_port : RFC3605 is not supported in this release, so 

##                  only default value can be used

## PRACK type : 0 = PRACK supported

##              1 = PRACK required

##              2 = PRACK disabled

## Codec settings : 0 = G711 (PCMU)

##                  4 = G723.1

##                  8 = G711 (PCMA)

##                 18 = G729A

###########################################################################

   register_expire=3600

   register_retry=300

   local_sip_port=

   sip_transport_mode=0

   local_rtp_port=42000

   local_rtcp_port=42001

   prack_type=0

   preferred_vocoder=8,0,4,18

###########################################################################

## SIP authentication. 

##

## Realm : If no authentication, leave empty

## Authentication name : HAS TO BE FILLED 

##                       If no authentication, PUT A VALUE LIKE none

## Authentication password : If no authentication, leave empty

###########################################################################

   authentication_realm=192.168.10.50

   authentication_name=202

   authentication_password=123456

   user_name=202

   display_name=Theo Messinis [202]

###########################################################################

## Voicemail settings

##

## Voice mail URI : directory number of the voice mail

## user name : directory number of the set

## MWI URI : complete SIP URI of the voice mail

###########################################################################

   voice_mail_uri=999

   message_waiting_indication_uri=202@192.168.10.50





[qos]



###########################################################################

## SIP & RTP DIFFSERV : [0,63]

## SIP QOS Tickets : 0 = disable

##           1 = enable

## SIP QOS Tickets Target : domain name

###########################################################################

   sip_diffserv=0

   rtp_diffserv=0

   sip_qos_tickets_enable=0

   sip_qos_tickets_target=





[sntp]



###########################################################################

## SNTP server settings (can be OXE or an external server)

##

## Timezone construction : UT::60:032902:102503

##          GMT delta : 60 = + sixty minutes from GMT time

##          Daylight saving start (mmddhh) : 032902 = 29 March 2am

##          Daylight saving end (mmddhh) : 102503 = 25 October 3am 

## The daylight saving settings HAVE to be changed each year.

###########################################################################

   sntp_addr=192.168.10.50

   timezone=UT::60:032902:102503





[telnet]



###########################################################################

## Password to access the telnet session

###########################################################################

   telnet_password=111111





[arp]



###########################################################################

## Mode : 0 = ARP spoofing disabled

##        1 = ARP spoofing enabled

###########################################################################

   arp_spoofing_enable=1

   arp_spoofing_timer=30





[init]



###########################################################################

## For IP Touch with SIP binary in 1.xx, 2.00.10 and 2.00.20, equal or greater than 2.00.81

##     mode 0 = SIP

##     mode 1 = NOE

##

## For IP Touch with SIP binary 2.00.30 to 2.00.80

##     mode 0 = NOE

##     mode 1 = SIP

###########################################################################

   application_mode=0





[audio]



###########################################################################

## Tone country : 0 = English

##                1 = French

##                2 = German

##                3 = Italian

##                4 = Spanish

##                5 = Dutch

##                6 = Portuguese

## DTMF type : 0 = RFC2833

##             1 = In-band

##             2 = SIP INFO

## DTMF level / RLR handset / SLR handset / Sidetone handset : 

## 0 = 0db, 1 = +3db, 2 = +6db, 3 = -3db, 4 = -6db

## VAD / DTMF feedback / Hearing Aid : 

##       0 = VAD not used

##       1 = VAD used

###########################################################################

   tone_country=0

   dtmf_type=1

   dtmf_level=0

   dtmf_avt_payload_type=96

   vad=0

   dtmf_feedback_enable=0

   rlr_handset=0

   slr_handset=0

   sidetone_handset=2

   hearing_aid_enable=0





[appl]



###########################################################################

## Password to access the administrator menu on the phone (digits only) 

## Power priority : 1 = critical

##                  2 = high

##                  3 = low

## Time format : 0 = 24 hours format

##               1 = AM / PM

## Speed dial numbers (first and last name, URI)

###########################################################################

   admin_password=000000

   bluetooth_parameters=blue

   supported_language=0

   remote_forward_code=

   remote_forward_deactive_code=

   power_priority=

   asset_id=

   time_format=

   speed_dial_1_first_name=

   speed_dial_1_last_name=

   speed_dial_1_uri=

   speed_dial_2_first_name=

   speed_dial_2_last_name=

   speed_dial_2_uri=

   speed_dial_3_first_name=

   speed_dial_3_last_name=

   speed_dial_3_uri=

   speed_dial_4_first_name=

   speed_dial_4_last_name=

   speed_dial_4_uri=





[admin]



###########################################################################

## Global admin parameters

## Binary polling timer : 10 min - 65535 min (default 480 min)

## Config polling timer : 5 min - 65535 min (default 60 min)

###########################################################################

   binary_polling_timer=480

   config_polling_timer=60

   disable_pc_port=0

   activate_vlan_filter=0

[cavagnaro]

Glad you find this. Now, on your 3CX do you have any incoming message from your set?
If not enable syslog on your set and check what is going on

[cavagnaro]

A Wireshark capture will also help you to understand what is going on

[krzysioD]

1st q:
is it extended edition? what is product code / part number from back of the set?
2nd q:
where you stuck? tried # and 'i' key, dhcp, clear all settings, turn off lldp and vlan, set to sip mode, set http provisoning.
and it will work.

[tangala]

If you share an example of your files here I can compare with mine to see if there are any parameters missing...

Hi Reinoud am trying to connect my ip touch 4018 and ip touch 4038 to my elastix pbx, i have been able to upload the ip touch firmware to pbx but dont have ip touch 4038. Do you by any change have the firmware for 4038. Also how can i connect/provision the IP TOUCH 4018 to my elastix pbx. Ure help will be great.