Asterisk-OXO-PSTN Calls
Asterisk-OXO-PSTN Calls
Hi, I have an Asterisk BOX connected to OXO by E1. Calls between OXO and Asterisk are working fine. Now how do i pick a trunk group in OXO and dial out?
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
You have to send (dial) from Asterisk the Trunk Group Seizure or ARS Seizure configured in OXO Dialling Plan followed by the number you want to dial. Also you must configure Joining between the E1 and the trunk(s) you want to break through in OXO; then a barring category for the E1 in order to give rights ton access whatever you need.
Regards.
Regards.
Re: Asterisk-OXO-PSTN Calls
Hi Alcatelbabe,
I did the integration for Asterisk 1.4.9 with my E1 TE110 and Sangoma A1xx and it's working fine, but now I am using TE220B and Asterisk 1.4.21.1 and I got no luck for it working with. Can you share with me what hardware and Asterisk release that you are using?
Perhaps, do it possible for you to share the zaptel.conf and zapata.conf file with me for this, I do appreciate if you can help.
Thank you in advance.
I did the integration for Asterisk 1.4.9 with my E1 TE110 and Sangoma A1xx and it's working fine, but now I am using TE220B and Asterisk 1.4.21.1 and I got no luck for it working with. Can you share with me what hardware and Asterisk release that you are using?
Perhaps, do it possible for you to share the zaptel.conf and zapata.conf file with me for this, I do appreciate if you can help.
Thank you in advance.