Asterisk and OXE r10.0.49 calling error
Asterisk and OXE r10.0.49 calling error
hi, i'm connecting last asterisk version with oxe r10.0.49, i have managed to connect the gateways, OXE says "in service" and asterisk OK so i made an outbound route from asterisk to oxe, and i try to call but an autoattendant come up and says that device is busy.
any help?
Edit: Asterisk CLI says this when i try to call: [2448][C-00000016]channel.c:4816 ast_prod: Prodding channel 'SIP/6001-00000022' failed
any help?
Edit: Asterisk CLI says this when i try to call: [2448][C-00000016]channel.c:4816 ast_prod: Prodding channel 'SIP/6001-00000022' failed
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Asterisk and OXE r10.0.49 calling error
Search on the forum on how to activate SIP traces on OXE and post a full detailed log. Magic balls are out of service for the moment
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Asterisk and OXE r10.0.49 calling error
most failure in my test enviroments was this ->
for incoming calls in oxe a gd with free compessor hardware must be in service...
regards...
for incoming calls in oxe a gd with free compessor hardware must be in service...
regards...
--- back to basics... focus your eyes to the essential things... ---
Re: Asterisk and OXE r10.0.49 calling error
cavagnaro
i add the sip trace to this post, info for analisys
i have two gateways, one with Asterisk1(192.168.1.98) a another with Asterisk2(192.168.1.88) in my lab, this time Asterisk2 is shutdown so ignore IP 192.168.1.88 errors, OXE have IP 192.168.1.97
tgn:
thanks, there is the posibility to virtualizate GD or i have to go to real hardware?
i add the sip trace to this post, info for analisys
i have two gateways, one with Asterisk1(192.168.1.98) a another with Asterisk2(192.168.1.88) in my lab, this time Asterisk2 is shutdown so ignore IP 192.168.1.88 errors, OXE have IP 192.168.1.97
tgn:
thanks, there is the posibility to virtualizate GD or i have to go to real hardware?
You do not have the required permissions to view the files attached to this post.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Asterisk and OXE r10.0.49 calling error
Real hardware only so please confirm us that this is your scenario. Otherwise no need for further analysis
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Asterisk and OXE r10.0.49 calling error
I have the three virtual machines running on a 2008 server, the only solution is to use GD?
I only use IPTouch 4038 for OXE, for asterisk all softphones.
Another question i have 0 standard sip licences and 350 andavanced sip licences what is the difference?
Thanks
I only use IPTouch 4038 for OXE, for asterisk all softphones.
Another question i have 0 standard sip licences and 350 andavanced sip licences what is the difference?
Thanks
Re: Asterisk and OXE r10.0.49 calling error
I have the virtual machines running on server, i only use ip phones, so GD is really needed?
I use iptouch for oxe and sip softphones for asterisk, there is a ip phone for oxe?
Last question what is the difference between standard and advanced sip users in OXE
Thanks
I use iptouch for oxe and sip softphones for asterisk, there is a ip phone for oxe?
Last question what is the difference between standard and advanced sip users in OXE
Thanks
Re: Asterisk and OXE r10.0.49 calling error
i think gd and inip3 can play cpu role but cpu can't play gd or intip role
so real hardewares are mandatory .
btw no call setup is seen in your siptrace only options
so real hardewares are mandatory .
btw no call setup is seen in your siptrace only options
Re: Asterisk and OXE r10.0.49 calling error
as said before .... real hardware (gd/gd3/intip/intip3) is mandatory.
regards...
regards...
--- back to basics... focus your eyes to the essential things... ---
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Asterisk and OXE r10.0.49 calling error
How are you implementing this if you have no idea on what you are doing? Please ask some professional services for you.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer