I was loading the release in VMware with Release 12 but I was unable to get the login prompt instead I’m getting
Grub loading stage 2...output on serial line
Is anybody having solution for that ?
Unable to get OXE login prompt
-
cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Unable to get OXE login prompt
Please don't double post around.
Maybe you had an error at the installation and missed it.
Check it again
Enviado de meu E6633 usando o Tapatalk
Maybe you had an error at the installation and missed it.
Check it again
Enviado de meu E6633 usando o Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Unable to get OXE login prompt
what did you load the VM as ??? try Blade server from PC Installer, If i remember correctly if you choose app server you need to have a terminal service setup
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."
-
mdhussainvlr
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: Unable to get OXE login prompt
Thanks old boy I tried with Blade server and it works fine
