Lol that is what I said at first post...kinda overlooked
Enviado de meu E6633 usando Tapatalk
Problems with communication between CS and FlexLM
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Problems with communication between CS and FlexLM
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Problems with communication between CS and FlexLM
which hostname have you give to the machine in the postinstalltion (first start after the ovf was depoyed)?
regards...
--- back to basics... focus your eyes to the essential things... ---
regards...
--- back to basics... focus your eyes to the essential things... ---
--- back to basics... focus your eyes to the essential things... ---
Re: Problems with communication between CS and FlexLM
i've never need to do this in newer flexlm systems. i think it is not necessary since the used licensefiles by lmgrd are in subfolder "final_licenses". they are generated each time the flexlm-service is started based on the *.ice file in $LICENSES_HOME and the servername is automatically inserted.murraya wrote: SERVER flexlic FLEXID=9-567D179F 27000
regards...
--- back to basics... focus your eyes to the essential things... ---
--- back to basics... focus your eyes to the essential things... ---
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Problems with communication between CS and FlexLM
Still you need to change the hostname on the flexlm license file, is a must on all flexlm deployments
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Problems with communication between CS and FlexLM
Hi
Today morning i replaced "this_host" with "flexlic" in my .ice file. Then I restarted flex server. Unfortunately it didn't help.
I still have messages "23/12/16 10:08:40 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15" on my CS (command incvisu).
I tried to restart CS too, but it didn't help.
BR
Grzegorz
Today morning i replaced "this_host" with "flexlic" in my .ice file. Then I restarted flex server. Unfortunately it didn't help.
I still have messages "23/12/16 10:08:40 000001M|---/--/-/---|=4:0642=FlexLM (192.168.7.63-27000) : Network breakdown with the server 1 15" on my CS (command incvisu).
I tried to restart CS too, but it didn't help.
BR
Grzegorz
Re: Problems with communication between CS and FlexLM
regards...tgn wrote:which hostname have you give to the machine in the postinstalltion (first start after the ovf was depoyed)?
--- back to basics... focus your eyes to the essential things... ---
--- back to basics... focus your eyes to the essential things... ---
Re: Problems with communication between CS and FlexLM
I don't remember exactly. I'm quite sure i was flaxlic.localdomain. I cann see this host name in General Information of the machine (VMware).
I'll try to install FlexLM once again and check it.
BR
Grzegorz
I'll try to install FlexLM once again and check it.
BR
Grzegorz
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: Problems with communication between CS and FlexLM
Read TG0084.
Like suggested above Flexlm uses domain name resolution. Pay attention to your reverse DNS config or hosts file configuration.
Many things solved like Frank mentioned in 11.2 (check release notes for flexlm stuff)
Like suggested above Flexlm uses domain name resolution. Pay attention to your reverse DNS config or hosts file configuration.
Many things solved like Frank mentioned in 11.2 (check release notes for flexlm stuff)
Re: Problems with communication between CS and FlexLM
Hi,
I created DNS server, reverse DNS and I changed host name in first line of .ice file.
Now situation looks much better. I have no messages about communication errors between CS and FlexLM.
System worked all day without rising the Panic Flag, so I think this part of my system is OK.
I'd like to thank very much all of you for help. I'm a beginner in ALE systems, so I'm sure I will ask you about other basic things in the nearest future.
regards
Grzegorz
I created DNS server, reverse DNS and I changed host name in first line of .ice file.
Now situation looks much better. I have no messages about communication errors between CS and FlexLM.
System worked all day without rising the Panic Flag, so I think this part of my system is OK.
I'd like to thank very much all of you for help. I'm a beginner in ALE systems, so I'm sure I will ask you about other basic things in the nearest future.
regards
Grzegorz