Oxe media server OXE MS installation in a VM - Page 3 - Alcatel Unleashed
ip and subnet mask must fit the network parameters of the subnetwork.cccengg wrote:
ip= 10.1.1.2
sub =255.255.255.0
Gateway = CS address
dns=CS address
Is this okey
which network adapter type did you choose in the vm? it should be e1000 when vm type is other linux 32bit.cccengg wrote:how to get rid of this error in OXE VM
can not open file /proc/sys/net/ipv4/conf/eth0/accept_redirects
My eher net is not showing in the ifconfig command
HI Tqntgn wrote: ↑04 Apr 2017 09:55 hmm... i prefer installation witout aleds and virtualbox for testing purposes
so i've checked point 2 (installation without aleds) with the actual iso-files from bwps.
conclusion -> it works without any error message...
what i've done:
1. creation of a new virtual machine in virtualbox (with default values for redhat64bit linux)
2. insert image bootdvd.6.4.010.008.x86_64.iso in virtual cdrom drive
3. switch on the virtual machine and install linux (german/german keyboard/timezone Europe/Berlin/Systemtime in UTC)
4. login first time -> give the ip-address/subnetmask/dns-server and default-gateway)
6. insert the image oms-3.06-IP0001.iso in virtual cdrom drive
7. mount the cdrom (mount /dev/cdrom)
8. start the oms installation (cd /media/cdrom; ./oxe_media_server-launcher.bin -console)
9. after installation mgconfig can be run...
used versions (with md5 checksum infront):
24ccc0bae9d4f01b3b4103ec570320dd bootdvd.6.4.010.008.x86_64.iso
47474841c3cf37e1717572a65ba9be1b oms-3.06-IP0001.iso
regards and good luck...