OXE Release 8 installation issues
OXE Release 8 installation issues
Hi guys, did anyone solved this issue yet?
I'm installing Release 8 ( G13028)
and after a while, my console port is showing me this:
Warning: undi_close() failed 1.
[Linux-bzImage, setup=oxa00, size=0x9f1ec]
[Linux-initrd @ 0x7c07000, 0x3e789a bytes]
During the installation process, I can see the new MAC address and the progress of the linux ram installation on the PCinstaller.
and then , when it get stucked, PC installer pops up an the following error message :" the installation has failed, please do check server log files".
Any hint how to sole this? Of course I have selected blade server and put the VMware Mac Address in the PC installer.
Thank in advance.
Alain
I'm installing Release 8 ( G13028)
and after a while, my console port is showing me this:
Warning: undi_close() failed 1.
[Linux-bzImage, setup=oxa00, size=0x9f1ec]
[Linux-initrd @ 0x7c07000, 0x3e789a bytes]
During the installation process, I can see the new MAC address and the progress of the linux ram installation on the PCinstaller.
and then , when it get stucked, PC installer pops up an the following error message :" the installation has failed, please do check server log files".
Any hint how to sole this? Of course I have selected blade server and put the VMware Mac Address in the PC installer.
Thank in advance.
Alain
Re: OXE Release 8 installation issues
We have loaded Rel 8 and Rel 8.0.1 with no issues at all.
What size partitions are you using on your VM Ware???
What size partitions are you using on your VM Ware???
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXE Release 8 installation issues
Are you installing it as Appliance or Blade server?
Re: OXE Release 8 installation issues
I've tried Blade server and appliance server, the partition size is 20 G
I do have 5 gigs free.
any other hints?
B.R.
I do have 5 gigs free.
any other hints?
B.R.
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: OXE Release 8 installation issues
Try to configure vm machine with fixed amount of space in virtual HDD a preallocated.
Also disable your firewall.
Regards.
Also disable your firewall.
Regards.
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: OXE Release 8 installation issues
Where is your PC installer, on the same pc as VMWARE or no ?
Code Free Or Die
Re: OXE Release 8 installation issues
Thank you guys, it's working fine,
it was just a FW issue
it was just a FW issue
Re: OXE Release 8 installation issues
I don't get it - what does it mean "it was just a FW issue"? Firewall issue? We have same problem. But ICS/firewall service even stopped. Also if start it and disable - we get same error.
Re: OXE Release 8 installation issues
eclipse wrote:I don't get it - what does it mean "it was just a FW issue"? Firewall issue? We have same problem. But ICS/firewall service even stopped. Also if start it and disable - we get same error.
If you have Cisco VPN installed, stop the process "Cisco Systems, Inc. VPN Service" Maybe all VPN-programs need to be stopped, i'm sure about the cisco.
J.Sundberg
Alcatel-Lucent CSE
CCO
CCIVR
ACR
Alcatel-Lucent CSE
CCO
CCIVR
ACR
-
- Member
- Posts: 8
- Joined: 25 Jun 2008 07:55
Re: OXE Release 8 installation issues
I have the same problem
Any Ideas??????
Any Ideas??????