OXE Release 8 installation issues

Dear Santa, I'd like a OXE virtualization on my PC. Can you help ?
ricardo7281
Member
Posts: 8
Joined: 25 Jun 2008 07:55

Re: OXE Release 8 installation issues

Post by ricardo7281 » 25 Aug 2008 17:38

I read the documentation and I do not find the problem!!!!
My virtual lab:

VMWare version: 6.0.3
------------------------------------------------------
Configuration vitual machine: custom
guest operation system: linux/ other linux 2.4.x kernel
networlk conection: use bridge networking
disk capacity: 8 GB
I have tried with and without: allocated all disk space now
------------------------------------------------------
Alcatel Pc installer 2.22
linux + call handing

Installation parametres
call server type: appilance server
call handling version: g1302
country: es (spain)
instalation type: standard
network type: company network
network interface: my network adapter 192.168.1.2
ip address: 192.168.1.3 (automatic)
ethernet address: mac address of virtual machine
-----------------------------------------------------

Welcome to Alcatel-Lucent e-Mediate installation

+------------------+ FTP Setup +------------------+
| |
| Please enter the following information: |
| |
| o the name or IP number of your FTP server |
| o the directory on that server containing |
| Red Hat Linux for your architecure |
| |
| FTP site name: ________________________ |
| Red Hat directory: ________________________ |
| |
| [ ] Use non-anonymous ftp or a proxy server |
| |
| +----+ +------+ |
| | Ok | | Back | |
| +----+ +------+ |
| |
| |
+-------------------------------------------------+

---------------------------------------------------------
In the virtual machine:
loaded 5005711 bytes (4888 kb) sucesfully
warning: undee_close () failed1
[linux-bzImage. setaup=0xa00, size=0x9b2c3]
[linux-intrd @ 0x7bcd000, 0x421a61 bytes]

Thanks all

kike
Member
Posts: 42
Joined: 29 Aug 2007 06:27

Re: OXE Release 8 installation issues

Post by kike » 26 Aug 2008 03:03

I would try to create the virtual machine again, but with LSI logic SCSI adapter (choose custom configuration), and inPC Installer use Blade Server instead Appliance Server.
Regards.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6813
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OXE Release 8 installation issues

Post by cavagnaro » 26 Aug 2008 03:05

:? what does the SCSI has to do with this?
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

ricardo7281
Member
Posts: 8
Joined: 25 Jun 2008 07:55

Re: OXE Release 8 installation issues

Post by ricardo7281 » 09 Sep 2008 09:56

It´s OK!!!!!!!

Finallly install a Tftp server Filezilla, and when the instalation it asks the server ftp,
I put the pc´s Ip address where I have the pc installer and in the filezilla server
we see the route that asks de instalation.
It is necessary to suppress tftp of pcinstaller, in the administrator of tasks!!!

uuufffffffffff, sorry with my English!!!

User avatar
johnson_tiam
Member
Posts: 160
Joined: 10 Apr 2007 05:19
Location: Indonesia.
Contact:

Re: OXE Release 8 installation issues

Post by johnson_tiam » 22 Oct 2008 22:22

Hi all,

anyone tried vmware with g.1503 yet?
i got problem after i finish doing the whole installation from the beginning (file -> new -> virtual machine and with pc installer on).
i'm setting these parameters:

------------------------------------------------------
Alcatel Pc installer 2.23
linux + call handing

Installation parametres
call server type: appilance server
call handling version: g1503
country: ii (indonesia)
instalation type: standard
network type: company network
network interface: (my vmware1 adapter) 1.1.1.14
ip address: 1.1.1.15 (automatic)
ethernet address: mac address of virtual machine (shown when i start the new virtual server)
---------------------------------------------------

i can finish my installation and pc installer send pop up that installation is success.
but when i want to start the oxe vmware for the first time.
"GRUB Loading stage2. output on the serial line..
Uncompressing Linux... Ok, booting the kernel."
then it just stuck, nothing happen anymore.

i also have add serial device,
using named pipe: \\.\pipe\com_1
this end is the server
the other end is a virtual machine
and i do turn on yield cpu on poll too.

anyway should i use appilance server or blade server for call server type at pc installer?
i think i have try blade server but i never succeed on the pc installer with it.

please do advice :)
Thank's

Best Regards,
johnson
Become the first ONE (World ClasS) open communication server and application solutions running on any enterprise network

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6813
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OXE Release 8 installation issues

Post by cavagnaro » 23 Oct 2008 02:22

That is normal behave...have you read the tutorial?
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
johnson_tiam
Member
Posts: 160
Joined: 10 Apr 2007 05:19
Location: Indonesia.
Contact:

Re: OXE Release 8 installation issues

Post by johnson_tiam » 23 Oct 2008 22:05

oh..i see.
so how do i telnet or console to my vmWare sir?
Thank's
Become the first ONE (World ClasS) open communication server and application solutions running on any enterprise network

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6813
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OXE Release 8 installation issues

Post by cavagnaro » 23 Oct 2008 22:07

Please read the tutorial...
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
johnson_tiam
Member
Posts: 160
Joined: 10 Apr 2007 05:19
Location: Indonesia.
Contact:

Re: OXE Release 8 installation issues

Post by johnson_tiam » 23 Oct 2008 22:25

ok thx.
Become the first ONE (World ClasS) open communication server and application solutions running on any enterprise network

User avatar
swinstation
Member
Posts: 458
Joined: 21 Mar 2009 17:14
Location: Alcatel world

Re: OXE Release 8 installation issues

Post by swinstation » 29 Jun 2009 00:43

hi
can you tell me where is the tutorial?

Post Reply

Return to “VMWARE”