on of my customer has series8/9 phones and crystal oxe with R9.he wants when the phone ringing the speaker led (hand set led) blinking.
In addition,it blinking already but for reason that i don't know it does'nt blinking anymore.
if anyone known about this feature please help me.
phone speaker led
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: phone speaker led
Check the set type configuration on OXE. Also if auto answer is enabled or not
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: phone speaker led
The phones type are 4018 & 4039 and auto answer is disable.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: phone speaker led
Yes, but in OXE, are they configured like those? Sometimes a bad configuration sets a 4068 as a 4038 for example and even when phone works it behaves and looks bad
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: phone speaker led
i know that.configure is correct and set type match to phone.all features is work correctly just the speaker(handset) led is off when the phone ringing.
Re: phone speaker led
I think this is not possible.
Speaker led:
- OFF - phone loudspeaker switched off
- ON - hands-free On
- Flash - phone loudspeaker and handset loudspeaker work at the same time.
Ask your customer - may be enough to customise ring melody (in this case user understand - which telephone ring)?
Speaker led:
- OFF - phone loudspeaker switched off
- ON - hands-free On
- Flash - phone loudspeaker and handset loudspeaker work at the same time.
Ask your customer - may be enough to customise ring melody (in this case user understand - which telephone ring)?
Re: phone speaker led
It is posible. At know when the attendant call users the led blinking but not working for when user call user
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: phone speaker led
I have tested this on two customers and never happens. Asked users if they ever saw that button blink and answer was never. So, I agree again with vad. If you say it is possible and we after tested and vad by huge experience say is not, then, something must be missing from your side. Maybe was another configuration. Maybe they used headsets. But not by default.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: phone speaker led
May be for attendant - we have some specific behaviour. F.e. when attendant dial user number (but not calls) - user "reserved" for attendant and so on.
But about usual calls - I never hear about specific management for speaker LED.
But about usual calls - I never hear about specific management for speaker LED.