OXO Card Replacement from MIXED to SLI-16

If you are looking for some parts, or selling some Alcatel stuff, this is the place !
Post Reply
adnaninline
Member
Posts: 13
Joined: 01 Jun 2017 11:41

OXO Card Replacement from MIXED to SLI-16

Post by adnaninline » 02 Jul 2017 12:34

Hello;
I want to know that can I replace "Mixed" Card of OXO with SLI-16 card by just unplugging one and plugging the other or are there any perquisites or power requirements difference between Mixed and SLI-16 card? Analog Access ports on different card got spoiled and we want to buy a SLI-16 card so that all those extension bring ON. We have a MIXED card that has digital and Trunk ports that are not in use so we want to eject that card and insert SLI-16 in place of that.
Any help would be greatly appreciated.

Kind Regards;
Adnan Alam.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7000
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OXO Card Replacement from MIXED to SLI-16

Post by cavagnaro » 02 Jul 2017 14:53

Unplug, configure OXO and done.

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7000
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OXO Card Replacement from MIXED to SLI-16

Post by cavagnaro » 02 Jul 2017 14:54

Of course users are still under license so you may not use all ports

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

adnaninline
Member
Posts: 13
Joined: 01 Jun 2017 11:41

Re: OXO Card Replacement from MIXED to SLI-16

Post by adnaninline » 02 Jul 2017 17:12

Dear cavagnaro,
Thank you for your reply. Please help me in my other post "Re: Asterisk and Alcatel OXO" where you asked to tell my configurations. I have attached screenshots of my Asterisk and OXO cofigurations. Please have a look and guide. I would be very thankful to you for that.

Kind Regards;
Adnan Alam.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7000
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OXO Card Replacement from MIXED to SLI-16

Post by cavagnaro » 02 Jul 2017 20:01

I do also have work ;) wait for free help

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

adnaninline
Member
Posts: 13
Joined: 01 Jun 2017 11:41

Re: OXO Card Replacement from MIXED to SLI-16

Post by adnaninline » 03 Jul 2017 11:08

:) OK Sir I wait. Thanks.

Kind Regards;
Adnan Alam.

Taureau14
Member
Posts: 1
Joined: 09 Sep 2017 10:22

Re: OXO Card Replacement from MIXED to SLI-16

Post by Taureau14 » 09 Sep 2017 10:23

adnaninline wrote:
02 Jul 2017 12:34
Hello;
I want to know that can I replace "Mixed" Card of OXO with SLI-16 card by just unplugging one and plugging the other or are there any perquisites or power requirements difference between Mixed and SLI-16 transfers paris airports card? Analog Access ports on different card got spoiled and we want to buy a SLI-16 card so that all those extension bring ON. We have a MIXED card that has digital and Trunk ports that are not in use so we want to eject that card and insert SLI-16 in place of that.
Any help would be greatly appreciated.

Kind Regards;
Adnan Alam.
Me too, I want to know

User avatar
giovanni.attolini
Member
Posts: 271
Joined: 16 Apr 2009 13:44
Location: Veranopolis-RS-BRAZIL
Contact:

Re: OXO Card Replacement from MIXED to SLI-16

Post by giovanni.attolini » 18 Sep 2017 08:01

Yes, you can.

But notice that in mixed boards analog ports are in the end of board, you need to configure extensions after change.
Giovanni A. Attolini
https://www.facebook.com/gio.atto

"When you make a stupid question, wait for a stupid answer!"

Post Reply

Return to “PARTS”