Hello;
I want to know that can I replace "Mixed" Card of OXO with SLI-16 card by just unplugging one and plugging the other or are there any perquisites or power requirements difference between Mixed and SLI-16 card? Analog Access ports on different card got spoiled and we want to buy a SLI-16 card so that all those extension bring ON. We have a MIXED card that has digital and Trunk ports that are not in use so we want to eject that card and insert SLI-16 in place of that.
Any help would be greatly appreciated.
Kind Regards;
Adnan Alam.
OXO Card Replacement from MIXED to SLI-16
-
- Member
- Posts: 13
- Joined: 01 Jun 2017 11:41
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXO Card Replacement from MIXED to SLI-16
Unplug, configure OXO and done.
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXO Card Replacement from MIXED to SLI-16
Of course users are still under license so you may not use all ports
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 13
- Joined: 01 Jun 2017 11:41
Re: OXO Card Replacement from MIXED to SLI-16
Dear cavagnaro,
Thank you for your reply. Please help me in my other post "Re: Asterisk and Alcatel OXO" where you asked to tell my configurations. I have attached screenshots of my Asterisk and OXO cofigurations. Please have a look and guide. I would be very thankful to you for that.
Kind Regards;
Adnan Alam.
Thank you for your reply. Please help me in my other post "Re: Asterisk and Alcatel OXO" where you asked to tell my configurations. I have attached screenshots of my Asterisk and OXO cofigurations. Please have a look and guide. I would be very thankful to you for that.
Kind Regards;
Adnan Alam.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXO Card Replacement from MIXED to SLI-16
I do also have work wait for free help
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 13
- Joined: 01 Jun 2017 11:41
Re: OXO Card Replacement from MIXED to SLI-16
OK Sir I wait. Thanks.
Kind Regards;
Adnan Alam.
Kind Regards;
Adnan Alam.
Re: OXO Card Replacement from MIXED to SLI-16
Me too, I want to knowadnaninline wrote: ↑02 Jul 2017 12:34 Hello;
I want to know that can I replace "Mixed" Card of OXO with SLI-16 card by just unplugging one and plugging the other or are there any perquisites or power requirements difference between Mixed and SLI-16 transfers paris airports card? Analog Access ports on different card got spoiled and we want to buy a SLI-16 card so that all those extension bring ON. We have a MIXED card that has digital and Trunk ports that are not in use so we want to eject that card and insert SLI-16 in place of that.
Any help would be greatly appreciated.
Kind Regards;
Adnan Alam.
- giovanni.attolini
- Member
- Posts: 276
- Joined: 16 Apr 2009 13:44
- Location: Veranopolis-RS-BRAZIL
- Contact:
Re: OXO Card Replacement from MIXED to SLI-16
Yes, you can.
But notice that in mixed boards analog ports are in the end of board, you need to configure extensions after change.
But notice that in mixed boards analog ports are in the end of board, you need to configure extensions after change.
Giovanni A. Attolini
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"
https://www.facebook.com/gio.atto
"When you make a stupid question, wait for a stupid answer!"