After upgrading to R12.1 with CS3, few of the analog set ring with a strange sound on first ring and then beep on remaining rings.
What parameter should i change to make it work in normal way.
Analog set ring tone
-
- Member
- Posts: 7
- Joined: 26 Oct 2017 02:33
- Location: Germany
- Contact:
Analog set ring tone
Regards
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Analog set ring tone
Analog is tied to boards, have you tried resetting them?
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 7
- Joined: 26 Oct 2017 02:33
- Location: Germany
- Contact:
Re: Analog set ring tone
Yes i did. I also tried rebooting the oxe but the results are the same.
Regards
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Analog set ring tone
Are these sets with the issue are on the same board or different ones?
Enviado de meu E6633 usando o Tapatalk
Enviado de meu E6633 usando o Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 7
- Joined: 26 Oct 2017 02:33
- Location: Germany
- Contact:
Re: Analog set ring tone
They are on different boards.
Regards
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Analog set ring tone
This beep is on the called set or the caller?
Enviado de meu E6633 usando o Tapatalk
Enviado de meu E6633 usando o Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 7
- Joined: 26 Oct 2017 02:33
- Location: Germany
- Contact:
Re: Analog set ring tone
Its on the called set. on first ring it ring with half ring but on second ring it just give beep.
Regards
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
Faheem
ACSE OXE/OT, ACFE OXO/OV8770/OXE/OT
Re: Analog set ring tone
Few ? Not all?
If you delete user and create again - problem solved or not?
Exist some relation between sets and behaviour (f.e. problem only with CLIP sets or hotel)?
If you delete user and create again - problem solved or not?
Exist some relation between sets and behaviour (f.e. problem only with CLIP sets or hotel)?