Incident PCM R2 board

Post Reply
User avatar
enio.eltz
Senior Member
Posts: 1039
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Incident PCM R2 board

Post by enio.eltz » 05 Sep 2011 06:39

Hi people

What is your opinion about this incident?

04/09/11 18:22:05 000001M|005/06/-/---|=3:0011=ERROR : SU functioning 6
04/09/11 18:22:30 000001M|005/06/-/---|=3:0011=ERROR : SU functioning 6

It is a PCM R2 board. There's no problem with the calls through it. Everything works fine.

Thanks.
Enio Eltz Filho
ACFE OXE R12/R11/R10
ACFE OXO CONNECT R2
ACFE OXO R10/R9

User avatar
enio.eltz
Senior Member
Posts: 1039
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: Incident PCM R2 board

Post by enio.eltz » 06 Sep 2011 12:27

Hi

No opinions???

Thanks.
Enio Eltz Filho
ACFE OXE R12/R11/R10
ACFE OXO CONNECT R2
ACFE OXO R10/R9

zap_ldu
Member
Posts: 2
Joined: 09 May 2011 16:24

Re: Incident PCM R2 board

Post by zap_ldu » 02 May 2012 11:45

hello. enio.eltz you can solve your problem? i have the same error.

User avatar
enio.eltz
Senior Member
Posts: 1039
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: Incident PCM R2 board

Post by enio.eltz » 03 May 2012 06:44

Hi

No, but I don't have issues, it is just this incident that I would like to know.
Enio Eltz Filho
ACFE OXE R12/R11/R10
ACFE OXO CONNECT R2
ACFE OXO R10/R9

pedro_alcatel_br
Member
Posts: 26
Joined: 31 Jul 2013 11:18
Location: São Paulo / Brazil

Re: Incident PCM R2 board

Post by pedro_alcatel_br » 10 Nov 2015 12:26

Hi fellas,

I've the same incident... and also no problems with calls...

Does anyone have any news about this?

Isalcatel
Member
Posts: 4
Joined: 05 Jul 2018 13:08

Re: Incident PCM R2 board

Post by Isalcatel » 17 Aug 2018 09:47

Hello,

I have the same incident. If anyone have information about this I'll be glad to know.

Thanks

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7001
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Incident PCM R2 board

Post by cavagnaro » 17 Aug 2018 16:36

Ahhh marvels of Brasilian R2 which is a modification of the standard R2. Why? No clue. Had a long talk some time ago with a guy who had years here and I was surprised by it.
It shouldn't happen and that is why pbx complaints. But as far as I have traced it doesn't affect the functionality at all

Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
Eliott
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 639
Joined: 10 Feb 2010 03:43

Re: Incident PCM R2 board

Post by Eliott » 16 Oct 2018 02:45

What does incinfo GEA 11 tells you?
Never seen before...

User avatar
enio.eltz
Senior Member
Posts: 1039
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: Incident PCM R2 board

Post by enio.eltz » 16 Oct 2018 07:01

Hi Eliott

It tells:
Decompressing /tmpd/incid_GEA.txt

INCIDENT NUMBER: 11
Network indicator: Alcatel 4400
OBJECT CLASS: Dhs3Board
EVENT TYPE: ProcessingErrorAlarm (10)
PROBABLE CAUSE: Unknown (0)
SEVERITY: Minor

"ERROR : SU functioning P1"
"P1 : Number of SU error"
"Fonctioning error on signalling unit"
"The SU cannot interpret an order sent by the CPU."
"no reaction of the system."
"Check the configuration for the equipment indicated by its position. If the"
"configuration is correct or if the equipment is of the "TERM_ALARM" type, note""
"the incident with all its information on an observation sheet (problem report),"
"specifying if possible the error context.";
But I don't have problems with the calls through the TG where the incident is showing.

Best regards.
Enio Eltz Filho
ACFE OXE R12/R11/R10
ACFE OXO CONNECT R2
ACFE OXO R10/R9

User avatar
Eliott
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 639
Joined: 10 Feb 2010 03:43

Re: Incident PCM R2 board

Post by Eliott » 16 Oct 2018 07:24

So something in the signalling is not understood. Mmm. As you say you have no issue I agree with cav and you => Ignore it.

Post Reply

Return to “Shelf”