NDDI-2 R9 stoped in Hunt group of Telecom?
NDDI-2 R9 stoped in Hunt group of Telecom?
Dear All
I have 5 lines Hunt Group from Telcom company have Voltage 66 V in NDDI-2 card is stop always so we must make Rest for time to time to can work
i want know this problem from card in my pbx or from Telecom company of high voltage ?
Thanks
M.Adel
I have 5 lines Hunt Group from Telcom company have Voltage 66 V in NDDI-2 card is stop always so we must make Rest for time to time to can work
i want know this problem from card in my pbx or from Telecom company of high voltage ?
Thanks
M.Adel
- Konstantinos.E
- Alcatel Unleashed Certified Guru
- Posts: 616
- Joined: 12 Jan 2010 04:15
- Location: Honolulu
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
when you mean stops you mean puts out of service the board?
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
when i call this hunt group(PSTN) This busy so we must make Rest to Board
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
and IN SERVICE board but have Hs of stat in trkstat command
-
- Alcatel Unleashed Certified Guru
- Posts: 1165
- Joined: 30 Aug 2006 13:43
- Location: Europe, Poland
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
1st thing on analog: you have good grounding / earthing installation connected to your pbx?
Please note that at no time I will provide you with OXE/4400 nor AOS releases.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
i make good Grounding have 0,5 ohm
- Konstantinos.E
- Alcatel Unleashed Certified Guru
- Posts: 616
- Joined: 12 Jan 2010 04:15
- Location: Honolulu
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
hi
check if you have overflow to this lines or the group...maybe stacks there.
you can check it by puting this lines out of the group and and check them one by one by calling them when you puting them again inside in the group.
so you can see witch line makes you the problem.
If this is not a problem try an other NDDI 2 board...
check if you have overflow to this lines or the group...maybe stacks there.
you can check it by puting this lines out of the group and and check them one by one by calling them when you puting them again inside in the group.
so you can see witch line makes you the problem.
If this is not a problem try an other NDDI 2 board...
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
Dear
I make this steps bout this problem is still
I make this steps bout this problem is still
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
Do you have some incidents about NDDI-2 board?
In trunks parameters you have trunk COS - External services/ trunk COS - for this COS - item "default transmission=yes"?
In trunks parameters you have trunk COS - External services/ trunk COS - for this COS - item "default transmission=yes"?
Re: NDDI-2 R9 stoped in Hunt group of Telecom?
i have this default Yes so Any step another this