GD-3 and CS-2 connected to one network, GD-3 ip is for example 192.168.1.12 and CS-2 is 192.168.1.15, problem is i cannot ping GD-3 from CS-2 and CS2 form GD-3 and when GD-3 is booting i'm getting this message:
Downloading /DHS3bin/downbin/mg3/binmg3 from 192.168.1.15
/etc/rc.d/init.d/binipmg_download: download_binary binmg3 failed
/etc/rc.d/init.d/binipmg_download: download of binmg3 failed: file not found on server or bad transfer or file corrupted
/etc/rc.d/init.d/binipmg_download: sleeping 5s then retrying...
Everything was ok, i have just turned off PBX and them moved to other location very strange
GD-3 and CS-2 cannot communicate with each other
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: GD-3 and CS-2 cannot communicate with each other
Did you performed a lanpbxbuild? Is the system secured?
Re: GD-3 and CS-2 cannot communicate with each other
No did not performed a lanpbxbuild, I'm new with all of this, what is that for ? The system is secured.
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: GD-3 and CS-2 cannot communicate with each other
Download the system documentation for OXE and follow the system installation guides.
Re: GD-3 and CS-2 cannot communicate with each other
Cannot find any installation guides on web, can you give me a link?
Re: GD-3 and CS-2 cannot communicate with each other
Thank you + 100 for your karma