Hi guys
We are getting a lot of HDB3 errors between on INTOF link on 2 shelfs. The shelf has gone down and then came up. Please if somebody can help here.
I am going to do the fiber tests. But normally would HDB3 be related to the coupler or INTOF Boards.
Regards
Tenna
INTOF - HDB3 Error
Re: INTOF - HDB3 Error
see related incident , try to reset both intofos
Re: INTOF - HDB3 Error
Hi
Did you check the synchronization of the public network access's ?
Regards
Did you check the synchronization of the public network access's ?
Regards
Re: INTOF - HDB3 Error
You have many INTOF shelves and only two with error?
Re: INTOF - HDB3 Error
Hello everyone
Please accept my sincere apologies for this. The Error was HDLC Frame Retransmission. Only one set of INTOFs A & B is generating this. All the other Shelfs connected over INTOF is ok.
I did a hard reset on the INTOFS, then for few days it did not generate these errors and then it started again.
Whilst I would be doing the fiber test, can it be that the INTOF board is bad.
Regards
Tenna
Please accept my sincere apologies for this. The Error was HDLC Frame Retransmission. Only one set of INTOFs A & B is generating this. All the other Shelfs connected over INTOF is ok.
I did a hard reset on the INTOFS, then for few days it did not generate these errors and then it started again.
Whilst I would be doing the fiber test, can it be that the INTOF board is bad.
Regards
Tenna
Re: INTOF - HDB3 Error
Try replace one INTOF set with another - you will have error on the same FO cores or on the same INTOF set.