No more TS between CR X and CR Y or no more conference
No more TS between CR X and CR Y or no more conference
Hi all.
After migrating from GD and MEX to GD3 and PowerMEX I have a problem with one media gateway.
I have multiple incidents
2011=No more TS between CR X and CR Y or no more conference resources
I've look at GD3 board in 3 media gateway and seen that there is no any available compressors
+===============================================================================+
| C O M P V I S U L I O |
+===============================================================================+
| cr | cp | type dsp | coupler state | H323 Gateway |
| | | | | for direct RTP |
| | | | | free/max |
|----|----|-------------------|---------------------------|---------------------|
| 2 | 0 | GD3 0ARMAD* | IN SERVICE | 29/30 |
| 3 | 0 | GD3 ARMADA* | IN SERVICE | 0/46 |
| 4 | 1 | GA3 0ARMAD* | IN SERVICE | 0/0 |
| 8 | 0 | GD MADA3* | IN SERVICE | 5/5 |
| 19 | 1 | INTIPA 1GIP6* | IN SERVICE | 0/0 |
| 19 | 2 | INTIPA 1GIP6* | OUT OF SERVICE | 0/0 |
|-------------------------------------------------------------------------------|
| '*' mean : transit is not provided on this board. |
+===============================================================================+
(59)cs1_59> config 3 0 -d
Fri Mar 14 15:09:08 YEKT 2014
+-------------------------------------------------------------------+
| Cr | cpl| Hardware type | cpl state | coupler ID |
|----|----|------------------------|--------------|-----------------|
| 3 | 0 | GD3 | IN SERVICE | BAD PCMS CODE |
| 3 | 0 | Board_ARMADA | IN SERVICE | NO PCMS CODE |
+-------------------------------------------------------------------+
--- Inter Crystal Topology ---
+-------------------------------------------------------------------------+
| CR | CPL Type Role Free/Tot Role Type CPL | CR |
|-------------------------------------------------------------------------|
|003 | 00 -GD3 (INT_A ) === 78/78 === ( MAIN) pwMEX - 00 |006 |
|-------------------------------------------------------------------------|
|003 | 00 -GD3 (INT_A ) === 78/78 === ( MAIN) pwMEX - 00 |007 |
|-------------------------------------------------------------------------|
|003 | 00 -GD3 (MAIN ) --- 46/46 --- ( INT_A) INTIPA - 01 |019 |
|-------------------------------------------------------------------------|
(59)cs1_59> cplstat 3 0
Fri Mar 14 15:09:46 YEKT 2014
Logic coupler type : INTMGD (77);
MAO coupler type : GD3 ;
Coupler state : IN SERVICE ;
Protocol country : RUSSIA_CIS (19);
Ghost equipment number : 30173 ;
First terminal number : 0 ;
Last terminal number : 0 ;
Specific data of the INT boards
Opposite crystal : 19
Opposite coupler : 1
Role part : 0
State of the link : 1
Signalling transmission mode : 0
Used TS : 0
Specific data of the IP boards
Board IP address (IPv4) : 7.59.0.17
Netmask IP : 255.255.255.0
Default Gateway IP address : 7.59.0.1
Board Ethernet Address : 00:80:9f:b6:85:ca
IP quality of service : 0
Current base UDP port : 0
Base UDP port for next initialization : 32000
Compression available for Gateway : 0
associated cpl : 27
AFU daugther board not present on this coupler.
Information about virtual Gpa :
Logic coupler type : CPL_GPA ;
MAO coupler type : GPA FICTIF ;
Coupler state : IN SERVICE ;
Protocol country : RUSSIA_CIS (19);
Ghost coupler neqt : 30174 ;
Voice Guide Language 1 : 1 ;
Voice Guide Language 2 : 221 ;
Voice Guide Language 3 : 255 ;
Voice Guide Language 4 : 255 ;
Detection equipments on this coupler :
- first dsp 0 terminal number : 0 ;
- last dsp 0 terminal number : 15 ;
- dsp 0 program : VG_PRG ;
Detection equipments on this coupler :
- first dsp 1 terminal number : 32 ;
- last dsp 1 terminal number : 63 ;
- dsp 1 program : CONFERENCE_PRG ;
Detection equipments on this coupler :
- first dsp 2 terminal number : 64 ;
- last dsp 2 terminal number : 93 ;
- dsp 2 program : DTO_R2_PRG ;
Voice guide equipments on this coupler :
- voice guide state : VG_STABLE ;
- first vg terminal number : 0 ;
- last vg terminal number : 15 ;
More information about voice guide may be displayed by vgstat 3 27
Tone emitter type registered on this coupler : TONE_R2
Tone emitter state on this coupler : EM_R2
Release version is
Delivery software version : i1.605 ;
Patch version : 41 ;
MAO software version : I1.605.39 ;
Software Version Name : R9.1 ;
Have any idea ?
After migrating from GD and MEX to GD3 and PowerMEX I have a problem with one media gateway.
I have multiple incidents
2011=No more TS between CR X and CR Y or no more conference resources
I've look at GD3 board in 3 media gateway and seen that there is no any available compressors
+===============================================================================+
| C O M P V I S U L I O |
+===============================================================================+
| cr | cp | type dsp | coupler state | H323 Gateway |
| | | | | for direct RTP |
| | | | | free/max |
|----|----|-------------------|---------------------------|---------------------|
| 2 | 0 | GD3 0ARMAD* | IN SERVICE | 29/30 |
| 3 | 0 | GD3 ARMADA* | IN SERVICE | 0/46 |
| 4 | 1 | GA3 0ARMAD* | IN SERVICE | 0/0 |
| 8 | 0 | GD MADA3* | IN SERVICE | 5/5 |
| 19 | 1 | INTIPA 1GIP6* | IN SERVICE | 0/0 |
| 19 | 2 | INTIPA 1GIP6* | OUT OF SERVICE | 0/0 |
|-------------------------------------------------------------------------------|
| '*' mean : transit is not provided on this board. |
+===============================================================================+
(59)cs1_59> config 3 0 -d
Fri Mar 14 15:09:08 YEKT 2014
+-------------------------------------------------------------------+
| Cr | cpl| Hardware type | cpl state | coupler ID |
|----|----|------------------------|--------------|-----------------|
| 3 | 0 | GD3 | IN SERVICE | BAD PCMS CODE |
| 3 | 0 | Board_ARMADA | IN SERVICE | NO PCMS CODE |
+-------------------------------------------------------------------+
--- Inter Crystal Topology ---
+-------------------------------------------------------------------------+
| CR | CPL Type Role Free/Tot Role Type CPL | CR |
|-------------------------------------------------------------------------|
|003 | 00 -GD3 (INT_A ) === 78/78 === ( MAIN) pwMEX - 00 |006 |
|-------------------------------------------------------------------------|
|003 | 00 -GD3 (INT_A ) === 78/78 === ( MAIN) pwMEX - 00 |007 |
|-------------------------------------------------------------------------|
|003 | 00 -GD3 (MAIN ) --- 46/46 --- ( INT_A) INTIPA - 01 |019 |
|-------------------------------------------------------------------------|
(59)cs1_59> cplstat 3 0
Fri Mar 14 15:09:46 YEKT 2014
Logic coupler type : INTMGD (77);
MAO coupler type : GD3 ;
Coupler state : IN SERVICE ;
Protocol country : RUSSIA_CIS (19);
Ghost equipment number : 30173 ;
First terminal number : 0 ;
Last terminal number : 0 ;
Specific data of the INT boards
Opposite crystal : 19
Opposite coupler : 1
Role part : 0
State of the link : 1
Signalling transmission mode : 0
Used TS : 0
Specific data of the IP boards
Board IP address (IPv4) : 7.59.0.17
Netmask IP : 255.255.255.0
Default Gateway IP address : 7.59.0.1
Board Ethernet Address : 00:80:9f:b6:85:ca
IP quality of service : 0
Current base UDP port : 0
Base UDP port for next initialization : 32000
Compression available for Gateway : 0
associated cpl : 27
AFU daugther board not present on this coupler.
Information about virtual Gpa :
Logic coupler type : CPL_GPA ;
MAO coupler type : GPA FICTIF ;
Coupler state : IN SERVICE ;
Protocol country : RUSSIA_CIS (19);
Ghost coupler neqt : 30174 ;
Voice Guide Language 1 : 1 ;
Voice Guide Language 2 : 221 ;
Voice Guide Language 3 : 255 ;
Voice Guide Language 4 : 255 ;
Detection equipments on this coupler :
- first dsp 0 terminal number : 0 ;
- last dsp 0 terminal number : 15 ;
- dsp 0 program : VG_PRG ;
Detection equipments on this coupler :
- first dsp 1 terminal number : 32 ;
- last dsp 1 terminal number : 63 ;
- dsp 1 program : CONFERENCE_PRG ;
Detection equipments on this coupler :
- first dsp 2 terminal number : 64 ;
- last dsp 2 terminal number : 93 ;
- dsp 2 program : DTO_R2_PRG ;
Voice guide equipments on this coupler :
- voice guide state : VG_STABLE ;
- first vg terminal number : 0 ;
- last vg terminal number : 15 ;
More information about voice guide may be displayed by vgstat 3 27
Tone emitter type registered on this coupler : TONE_R2
Tone emitter state on this coupler : EM_R2
Release version is
Delivery software version : i1.605 ;
Patch version : 41 ;
MAO software version : I1.605.39 ;
Software Version Name : R9.1 ;
Have any idea ?
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: No more TS between CR X and CR Y or no more conference
What are the values for:
-No of compressors for IP devices (GD3 parameters)
-N party conference configuration (GD3 parameters)
-N party conference modularity (system)?
Can you show us the exact alarm that you are receiving? (values for X and Y)?
Do you use 4645 Voice mail? Embedded or separate server?
Do you use DR-Link recording?
-No of compressors for IP devices (GD3 parameters)
-N party conference configuration (GD3 parameters)
-N party conference modularity (system)?
Can you show us the exact alarm that you are receiving? (values for X and Y)?
Do you use 4645 Voice mail? Embedded or separate server?
Do you use DR-Link recording?
Re: No more TS between CR X and CR Y or no more conference
Thank you for replay
That is additional data
14/03/14 16:31:00 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:01 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:01 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:01 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:09 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:09 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:13 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 7 or no more conference resources
+-Review/Modify: System Parameters----------------------------------------+
| |
| Node Number (reserved) : 59 |
| Instance (reserved) : 1 |
| Instance (reserved) : 1 |
| System Option + N Conference Modularity |
| |
| N Conference Modularity : 30 |
| |
+-------------------------------------------------------------------------+
+-Review/Modify: Board------------------------------------------------+
| |
| Node Number (reserved) : 59 |
| Shelf Address : 3 |
| Board Address : 0 |
| |
| Interface Type + GD3 |
| Virtual board + NO |
| Serial number : -------------- |
| Usage State + Idle |
| Operational State + Enabled |
| Main/Standby State + Main (Master) |
| Number Of Sets Connected : 0 |
| Country + Default |
| Incidents Teleservice + YES |
| Daughter Board + ARMADA |
| No. of Compressors for IP Devices : 45 |
| N part conferences configuration + No conference |
| N part conference type + Add-on |
| Zone Paging + YES |
| Use of volume in system + YES |
| Local Volume (dB) : 0 |
| AFU Daughterboard + NO |
| AFU Directory Number : -------- |
| eMG Rescue + NO |
| e-RMA Feature + NO |
| |
+---------------------------------------------------------------------+
I do not use voice mail or DR-LINK
That is additional data
14/03/14 16:31:00 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:01 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:01 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:01 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:09 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:09 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 3 or no more conference resources
14/03/14 16:31:13 000059M|002/06/0/000|=4:2011=No more TS between CR 2 and CR 7 or no more conference resources
+-Review/Modify: System Parameters----------------------------------------+
| |
| Node Number (reserved) : 59 |
| Instance (reserved) : 1 |
| Instance (reserved) : 1 |
| System Option + N Conference Modularity |
| |
| N Conference Modularity : 30 |
| |
+-------------------------------------------------------------------------+
+-Review/Modify: Board------------------------------------------------+
| |
| Node Number (reserved) : 59 |
| Shelf Address : 3 |
| Board Address : 0 |
| |
| Interface Type + GD3 |
| Virtual board + NO |
| Serial number : -------------- |
| Usage State + Idle |
| Operational State + Enabled |
| Main/Standby State + Main (Master) |
| Number Of Sets Connected : 0 |
| Country + Default |
| Incidents Teleservice + YES |
| Daughter Board + ARMADA |
| No. of Compressors for IP Devices : 45 |
| N part conferences configuration + No conference |
| N part conference type + Add-on |
| Zone Paging + YES |
| Use of volume in system + YES |
| Local Volume (dB) : 0 |
| AFU Daughterboard + NO |
| AFU Directory Number : -------- |
| eMG Rescue + NO |
| e-RMA Feature + NO |
| |
+---------------------------------------------------------------------+
I do not use voice mail or DR-LINK
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: No more TS between CR X and CR Y or no more conference
Make a test and see if you can reproduce the error when you do a 3 way conference.
How are your IP domains configured?
If you declare just 30 ip resources and reboot the board what happens (show compvisu lio afterwards)
How are your IP domains configured?
If you declare just 30 ip resources and reboot the board what happens (show compvisu lio afterwards)
Re: No more TS between CR X and CR Y or no more conference
I'll try to do a 3-way conference at the next monday.
I have 0 default ip domain with next configuration
+-Review/Modify: IP domain--------------------------------------------------------------+
| |
| Node Number (reserved) : 59 |
| Instance (reserved) : 1 |
| IP Domain Number : 0 |
| |
| IP Domain Name : -------------------- |
| Country + Default |
| Intra-domain Coding Algorithm + Default |
| Extra-domain Coding Algorithm + Default |
| FAX/MODEM Intra domain call transp + NO |
| FAX/MODEM Extra domain call transp + NO |
| G722 allowed in Intra-domain + NO |
| G722 allowed in Extra-domain + NO |
| Tandem Primary Domain : -1 |
| Domain Max Voice Connection : -1 |
| IP Quality of service : 0 |
| Contact Number : ------------------------------ |
| Backup IP address : ----------------------------------------------- |
| Trunk Group ID : -1 |
| IP recording quality of service : 0 |
| Time Zone Name + Asia/Yekaterinburg |
| Calling Identifier : ------------------------------ |
| Supplement. Calling Identifier : ------------------------------ |
| SIP Survivability Mode + NO |
| |
+---------------------------------------------------------------------------------------+
After the change of compressor's number I have the next situation:
+===============================================================================+
| C O M P V I S U L I O |
+===============================================================================+
| cr | cp | type dsp | coupler state | H323 Gateway |
| | | | | for direct RTP |
| | | | | free/max |
|----|----|-------------------|---------------------------|---------------------|
| 2 | 0 | GD3 0ARMAD* | IN SERVICE | 30/30 |
| 3 | 0 | GD3 ARMADA* | IN SERVICE | 0/30 |
| 4 | 1 | GA3 0ARMAD* | IN SERVICE | 0/0 |
| 8 | 0 | GD MADA3* | IN SERVICE | 5/5 |
| 19 | 1 | INTIPA 1GIP6* | IN SERVICE | 0/0 |
| 19 | 2 | INTIPA 1GIP6* | OUT OF SERVICE | 0/0 |
|-------------------------------------------------------------------------------|
| '*' mean : transit is not provided on this board. |
+===============================================================================+
cs1_59> compvisu 3 0
Fri Mar 14 17:23:05 YEKT 2014
+==============================================================================+
| C O M P R E S S O R S T A T E Coupler type : GD3, (3-0) ARMADA |
| Coupler state : IN SERVICE |
| - compvisu - Busy : OFF |
|------------------------------------------------------------------------------|
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| Max Nb Compr Allowed SIMULTANEOUSLY : 30 |
|------------------------------------------------------------------------------|
| Compr State: X = unusable, . = Free, OS = Out Of Service |
| IP Device : CI = Local IP Phone, CR = Local Remote |
| RTP Direct : CG = Comp used:Flux RTP on GW, FI = Comp Free:Flux RTP on IPP |
| Fax Over IP: TF = T38 Fax |
| Transparency over IP : M = Modem, D = Data |
+==============================================================================+
I have 0 default ip domain with next configuration
+-Review/Modify: IP domain--------------------------------------------------------------+
| |
| Node Number (reserved) : 59 |
| Instance (reserved) : 1 |
| IP Domain Number : 0 |
| |
| IP Domain Name : -------------------- |
| Country + Default |
| Intra-domain Coding Algorithm + Default |
| Extra-domain Coding Algorithm + Default |
| FAX/MODEM Intra domain call transp + NO |
| FAX/MODEM Extra domain call transp + NO |
| G722 allowed in Intra-domain + NO |
| G722 allowed in Extra-domain + NO |
| Tandem Primary Domain : -1 |
| Domain Max Voice Connection : -1 |
| IP Quality of service : 0 |
| Contact Number : ------------------------------ |
| Backup IP address : ----------------------------------------------- |
| Trunk Group ID : -1 |
| IP recording quality of service : 0 |
| Time Zone Name + Asia/Yekaterinburg |
| Calling Identifier : ------------------------------ |
| Supplement. Calling Identifier : ------------------------------ |
| SIP Survivability Mode + NO |
| |
+---------------------------------------------------------------------------------------+
After the change of compressor's number I have the next situation:
+===============================================================================+
| C O M P V I S U L I O |
+===============================================================================+
| cr | cp | type dsp | coupler state | H323 Gateway |
| | | | | for direct RTP |
| | | | | free/max |
|----|----|-------------------|---------------------------|---------------------|
| 2 | 0 | GD3 0ARMAD* | IN SERVICE | 30/30 |
| 3 | 0 | GD3 ARMADA* | IN SERVICE | 0/30 |
| 4 | 1 | GA3 0ARMAD* | IN SERVICE | 0/0 |
| 8 | 0 | GD MADA3* | IN SERVICE | 5/5 |
| 19 | 1 | INTIPA 1GIP6* | IN SERVICE | 0/0 |
| 19 | 2 | INTIPA 1GIP6* | OUT OF SERVICE | 0/0 |
|-------------------------------------------------------------------------------|
| '*' mean : transit is not provided on this board. |
+===============================================================================+
cs1_59> compvisu 3 0
Fri Mar 14 17:23:05 YEKT 2014
+==============================================================================+
| C O M P R E S S O R S T A T E Coupler type : GD3, (3-0) ARMADA |
| Coupler state : IN SERVICE |
| - compvisu - Busy : OFF |
|------------------------------------------------------------------------------|
|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| Max Nb Compr Allowed SIMULTANEOUSLY : 30 |
|------------------------------------------------------------------------------|
| Compr State: X = unusable, . = Free, OS = Out Of Service |
| IP Device : CI = Local IP Phone, CR = Local Remote |
| RTP Direct : CG = Comp used:Flux RTP on GW, FI = Comp Free:Flux RTP on IPP |
| Fax Over IP: TF = T38 Fax |
| Transparency over IP : M = Modem, D = Data |
+==============================================================================+
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: No more TS between CR X and CR Y or no more conference
After the change of the parameter did you reboot the board/shelf?
You can try to change the GD3 just to test if it is a hw problem.
You can try to change the GD3 just to test if it is a hw problem.
Re: No more TS between CR X and CR Y or no more conference
Yes, sure, I rebooted it
I can use just old GD board. We have no more GD3 boards
I can use just old GD board. We have no more GD3 boards
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: No more TS between CR X and CR Y or no more conference
Looks pretty strange.
I would try to delete the shelf and recreate it.
I would try to delete the shelf and recreate it.
Re: No more TS between CR X and CR Y or no more conference
It's very hard to delete and recreate board because of active users.
I created a new shelf 10 and registered a GD3 board with it but the result was the same - there is no available compressors
I created a new shelf 10 and registered a GD3 board with it but the result was the same - there is no available compressors
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: No more TS between CR X and CR Y or no more conference
Now I think is clear.nuviton wrote:It's very hard to delete and recreate board because of active users.
I created a new shelf 10 and registered a GD3 board with it but the result was the same - there is no available compressors
Check with spadmin lock 469
Check the value against the total compressor resources active in your system.