unable to connect to GD3

Post Reply
NewTOAlcatel
Member
Posts: 1
Joined: 08 Dec 2016 03:43

unable to connect to GD3

Post by NewTOAlcatel » 08 Dec 2016 03:48

Hello Everyone,
we has buy a new OmniPCX, one GD3 and one cs-2,
i am trying to connect to gateway through console but, cannot, i am using normal console blue cable,
i am not getting any signals from GD, i used virtual windows 7 and windows xp.
also there is adapter ( converter usb to console) is that the problem.
because these days there is no console port in pcs and laptops.

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3461
Joined: 23 Sep 2004 06:47
Location: Russia

Re: unable to connect to GD3

Post by vad » 08 Dec 2016 04:30

1 - normal console blue cable - from Cisco switch? If YES - you need to use another cable ( RG45 connector rotated 180 degrees).
2 - another question - usb-to-console adapter works? If adapter with DB9 connector - start terminal program (9600-8-N-1, without transmission control), connect pin 2 and 3 (DB9), type something on keyboard - do you see something?

Post Reply

Return to “Media Gateway”